Контрольное и измерительное оборудование
Оборудование для контроля и учета газов
Автоматизация производственных процессов
Весоизмерительное оборудование
Геодезическое оборудование
Взрывозащищенное и силовое оборудование
Оборудование для обслуживание холодильных систем
Лабораторное оборудование
Строительное и дорожное оборудование
Средства индивидуальной защиты
Инструмент
Оборудование и приборы для работы с элегазом (SF6)
Бренд-зона
Импортные электронные компоненты по онлайн каталогам
Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на zakaz@lanfor.ru
- With pre-wired cable
- Actuation from side
- without bias magnet
- Non-contact principle
- Long life
- Actuating surface and direction of actuation marked by switch symbol
- Construction form Ø 13 mm
- Thermoplastic enclosure
- Actuating distance up to 60 mm depending on actuating magnet and version
- with central mounting
Ordering data
| Note (Delivery capacity) | Not available! |
| Product type description | BN 65-10Z/1 |
| Article number (order number) | 101055805 |
| EAN (European Article Number) | 4030661009612 |
| eCl@ss number, Version 9.0 | 27-27-01-05 |
| eCl@ss number, Version 11.0 | 27-27-01-05 |
| ETIM number, version 6.0 | EC002544 |
| ETIM number, version 7.0 | EC002544 |
Approval - Standards
| Certificates | cULus |
General data
| Active principle | Magnetic drive |
| Housing construction form | Cylinder smooth |
| Enclosure material | Glass-fibre, reinforced thermoplastic |
| Gross weight | 66 g |
General data - Features
| Number of shutters | 1 |
Mechanical data
| Actuating panels | lateral |
| Active area | lateral |
| Actuating element | Magnet |
| Mechanical life, minimum | 1,000,000,000 Operations |
| Repeat accuracy R R | 0.3 mm |
| Actuating speed, maximum | 18 m/s |
| Mounting | central with threated flange |
| Tightening torque of nuts, maximum | 3 Nm |
Mechanical data - Switching distances according IEC 60947-5-3
| Switch distance Sn | 5 mm … 50 mm BP 10 = 5 mm 2 x BP 10 = 17 mm BP 15 = 6 mm 2 x BP 15/2 = 17 mm BP 34 = 15 ... 20 mm BP 20 = 20 mm BP 31 = 20 mm BP 11 = 20 mm BP 21 = 25 ... 50 mm 2 x BP 15 = 17mm BP 12 = 10 … 30 mm |
| Notice (Switch distance Sn) | Actuating distance up to 50 mm depending on version and actuating magnet |
Mechanical data - Connection technique
| Terminal Connector | Cable |
| Length of cable | 1 m |
| Wire cross-section | 0.75 mm2 |
| Wire cross-section | 18 AWG |
| Material of the Cable mantle | H03VV-F |
Mechanical data - Dimensions
| Diameter of sensor | 13 mm |
| width across flats | 22 BK |
| Length of sensor | 103 mm |
Ambient conditions
| Degree of protection | IP67 |
| Ambient temperature, minimum | -25 °C |
| Ambient temperature, maximum | +75 °C |
| Resistance to vibrations to EN 60068-2-6 | 10 … 55 Hz, amplitude 1 mm |
| Restistance to shock | 30 g, on sine wave oscillation |
| Resistant to vibration | 30 g, on sine wave oscillation |
Electrical data
| Switching voltage, maximum | 250 VAC |
| Switching current, maximum | 3 A |
| Switching capacity, maximum | 120 W |
| Switching capacity, maximum | 120 VA |
| Switching element | Normally open contact (NO) |
| Bounce duration, minimum | 0.3 ms |
| Bounce duration, maximum | 0.6 ms |
| Switching frequency, maximum | 300 Hz |
| Switching frequency | 1,080,000 /h |
Electrical data - Digital Output
| Versions | Reed contacts |
Scope of delivery
| Included in delivery | Actuators must be ordered separately. |
Accessory
| Recommendation (actuator) | BP 10 2x BP 10 BP 15 2x BP 15 2x BP 15/2 BP 34 BP 20 BP 31 BP 11 BP 12 BP 21 |
Наш менеджер свяжется с вами в ближайшее время
