- 1 Cable entry M 20 x 1.5
- Thermoplastic enclosure
- DC 2-wire
- Double-insulated
- Wiring compartment
- Design 333
Ordering data
Note (Delivery capacity) | Not available! |
Product type description | IFL 20-333-10D |
Article number (order number) | 101089732 |
eCl@ss number, Version 9.0 | 27-27-01-01 |
eCl@ss number, Version 11.0 | 27-27-01-01 |
ETIM number, version 6.0 | EC002714 |
ETIM number, version 7.0 | EC002714 |
General data
Standards | IEC/EN 60947-5-2 DIN VDE 0660-208 |
Housing construction form | Block |
Installation conditions (mechanical) | not flush |
Enclosure material | Plastic |
Material of the cover | Luran |
Gross weight | 160 g |
General data - Features
Integral System Diagnostics, status | Yes |
Number of cable wires | 2 |
Mechanical data - Switching distances according IEC 60947-5-3
Switch distance | 20 mm |
Mechanical data - Connection technique
Terminal Connector | Screw connection |
Cable section, maximum | 2 x 1.5 mm² |
Note (Cable section) | All indications about the cable section are including the conductor ferrules. |
Mechanical data - Dimensions
Length of sensor | 40 mm |
Width of sensor | 112 mm |
Height of sensor | 40 mm |
Ambient conditions
Degree of protection | IP65 to EN 60529 |
Ambient temperature, minimum | -25 °C |
Ambient temperature, maximum | +70 °C |
Protection rating | II |
Electrical data
Voltage type | DC (direct current) |
Operating voltage, minimum | 15 V |
Operating voltage, maximum | 150 V |
Operating current, minimum | 0.01 mA |
Operating current | 200 mA |
Switching element | Normally open contact (NO) |
Protection circuit integrated | inductive interference protection Protection against polarity reversal |
Switching frequency, approx. | 500 Hz |
Electrical data - Digital Output
Voltage drop Ud, maximum | 8.5 V |
Current at Voltage drop Ud | 0.2 A |
Versions | Two-wire |
Current leakage Ir | 1 mA |
Status indication
Note (Integral System Diagnostics, status ) | yellow LED |
Notes
Note (General) | By repositioning the switch 5 different actuating directions can be selected. The selected actuating direction can be marked with a sticker. |