- 3 Cable entry M 20 x 1.5
- Metal enclosure
- Good resistance to oil and petroleum spirit
- Actuator heads can be repositioned by 4 x 90°
- 66,7 mm x 107 mm x 65,3 mm
- Actuator shaft can be turned 360°
Ordering data
Product type description | TV10S 355-02Z |
Article number (order number) | 101117212 |
EAN (European Article Number) | 4030661073453 |
eCl@ss number, Version 9.0 | 27-27-06-09 |
eCl@ss number, Version 11.0 | 27-27-06-09 |
ETIM number, version 6.0 | EC002591 |
ETIM number, version 7.0 | EC002591 |
Approval - Standards
Certificates | cULus CCC EAC |
General data
Enclosure material | Aluminium |
Enclosure coating material | painted |
Material of the contacts, electrical | Silver |
Gross weight | 315 g |
General data - Features
Number of safety contacts | 2 |
Safety appraisal
Standards | BG-GS-ET-15 EN ISO 13849-1 EN 60947-5-1 |
Mission Time | 20 Year(s) |
Safety appraisal - Safety outputs
B10d Normally-closed contact (NC) | 20,000,000 Operations |
Mechanical data
Actuating element | Other |
Mechanical life, minimum | 1,000,000 Operations |
Positive break angle | 7 ° |
Mounting hole for the Shaft | 10 mm |
Positive break torque | 0.6 Nm |
Mechanical data - Connection technique
Terminal Connector | Screw connection |
Cable section, minimum | 0.75 mm² |
Cable section, maximum | 2.5 mm² |
Note (Cable section) | All indications about the cable section are including the conductor ferrules. |
Mechanical data - Dimensions
Length of sensor | 65.3 mm |
Width of sensor | 66.7 mm |
Height of sensor | 107 mm |
Ambient conditions
Degree of protection | IP67 |
Ambient temperature, minimum | -25 °C |
Ambient temperature, maximum | +70 °C |
Ambient conditions - Insulation value
Rated insulation voltage Ui | 500 V |
Rated impulse withstand voltage Uimp | 6 kV |
Electrical data
Thermal test current | 10 A |
Utilisation category AC-15 | 230 VAC |
Utilisation category AC-15 | 4 A |
Utilisation category DC-13 | 24 VDC |
Utilisation category DC-13 | 4 A |
Switching element | Opener (NC) |
Switching principle | Creep circuit element |
Switching frequency | 1,000 /h |
Notes
Note (General) | By turning the head in 90° steps, 8 actuating planes are possible. A Torx T10 screwdriver is required for this purpose. Even when the screw is removed, the head is self-retaining. The switch can still not be tampered. Adjustment tool: locking screw to fix, shaft pre-drilled to pin Universal joint available to compensate for axial displacement (only for shaft bore 10 mm) |