- Metal enclosure
- Long life
- 40 mm x 76 mm x 40 mm ( basic component)
- Suitable for low actuating speeds
- 1 Cable entry M 20 x 1.5
- free of silicon
- proved in power station applications
- Can be actuated from any direction
- Elasticity of the spring allows for deflection above the max. switching angle of 15°
Ordering data
Product type description | MAF 330-11Y-M20 |
Article number (order number) | 101160633 |
EAN (European Article Number) | 4030661190945 |
eCl@ss number, Version 9.0 | 27-27-06-01 |
eCl@ss number, Version 11.0 | 27-27-06-01 |
ETIM number, version 6.0 | EC000030 |
ETIM number, version 7.0 | EC000030 |
Approval - Standards
Certificates | cULus CCC EAC |
General data
Standards | EN 60947-5-1 |
Active principle | mechanical |
Enclosure material | Light-alloy diecast, paint finish |
Enclosure coating material | painted |
Material of the contacts, electrical | Silver |
Material of the rod | Metal film |
Gross weight | 200 g |
General data - Features
Number of openers | 1 |
Number of shutters | 1 |
Safety appraisal - Safety outputs
B10d Normally-closed contact (NC) | 20,000,000 Operations |
Mechanical data
Actuating element | Spring rod lever |
Mechanical life, minimum | 30,000,000 Operations |
Contact opening | 2 x 0.5 mm |
Actuating speed, minimum | 1 mm/min |
Repeat accuracy of switching points | 0.02 |
Mechanical data - Connection technique
Terminal Connector | Screw connection |
Cable section, minimum | 1.5 mm² |
Cable section, maximum | 2.5 mm² |
Note (Cable section) | All indications about the cable section are including the conductor ferrules. |
Wire cross-section | 13 AWG |
Mechanical data - Dimensions
Length of sensor | 40 mm |
Width of sensor | 40 mm |
Height of sensor | 184.5 mm |
Diameter of the Rod | 8 mm |
Ambient conditions
Degree of protection | IP65 to EN 60529 |
Ambient temperature, minimum | -30 °C |
Ambient temperature, maximum | +90 °C |
Restistance to shock | 50 g / 6 ms |
Ambient conditions - Insulation value
Rated insulation voltage Ui | 250 V |
Rated impulse withstand voltage Uimp | 4 kV |
Electrical data
Thermal test current | 6 A |
Utilisation category AC-15 | 230 VAC |
Utilisation category AC-15 | 2.5 A |
Switching element | NO contact, NC contact |
Note (Switching element) | galvanically separated contact bridges |
Switching principle | Snap switch element |
Bounce duration, maximum | 43,221 ms |
Switchover time, maximum | 10 ms |