Контрольное и измерительное оборудование
Оборудование для контроля и учета газов
Автоматизация производственных процессов
Весоизмерительное оборудование
Геодезическое оборудование
Взрывозащищенное и силовое оборудование
Оборудование для обслуживание холодильных систем
Лабораторное оборудование
Строительное и дорожное оборудование
Средства индивидуальной защиты
Инструмент
Оборудование и приборы для работы с элегазом (SF6)
Бренд-зона
Импортные электронные компоненты по онлайн каталогам
Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на zakaz@lanfor.ru
- Ex-certified screwed cable gland
- Metal enclosure
- 3 Contacts
- 40,5 mm x 114 mm x 38 mm
- Long life
- Can be mounted on a flat surface
- Actuator heads can be repositioned in steps 4 x 90°
- Mounting details to EN 50041
- High level of contact reliability with low voltages and currents
- 1 Cable entry M 20 x 1.5
- Slotted holes for adjustment, circular holes for location
- Ex certified
- Transverse and longitudinal slotted holes
Ordering data
| Note (Delivery capacity) | Not available! |
| Product type description | EX-AZ 335-12ZK-3D |
| Article number (order number) | 101186429 |
Explosion protection
| Explosion protection: regulations | BG-GS-ET-15 EN 60947-5-1 EN 61241-1 |
| Explosion protection zones | 22 |
| Explosion protection category | 3D |
| Explosion protection designation | Ex tD A22 IP67 T90°C X |
General data
| Enclosure material | Light alloy die-casting |
| Enclosure coating material | painted |
| Material of the contacts, electrical | Silver |
| Gross weight | 300 g |
General data - Features
| Number of auxiliary contacts | 1 |
| Number of safety contacts | 2 |
Safety appraisal
| Standards | EN ISO 13849-1 |
| Mission Time | 20 Year(s) |
Safety appraisal - Safety outputs
| B10d Normally-closed contact (NC) | 2,000,000 Operations |
| B10d Normally open contact (NO) | 1,000,000 Operations |
| Note (B10d Normally open contact (NO)) | at 10% Ie and ohmic load |
Mechanical data
| Mechanical life, minimum | 10,000,000 Operations |
| Latching force | 5 N |
| positive break travel | 10.7 mm |
| Positive break force, minimum | 5 N |
| Actuating speed, maximum | 1 m/s |
Mechanical data - Connection technique
| Terminal Connector | Screw connection |
| Cable cross-section of the cable glands, minimum | 6 mm |
| Cable cross-section of the cable glands, maximum | 12 mm |
| Cable section, minimum | 0.75 mm² |
| Cable section, maximum | 2.5 mm² |
| Note (Cable section) | All indications about the cable section are including the conductor ferrules. |
Mechanical data - Dimensions
| Length of sensor | 38 mm |
| Width of sensor | 40.5 mm |
| Height of sensor | 114 mm |
Ambient conditions
| Degree of protection | IP67 to EN 60529 |
| Ambient temperature, minimum | -20 °C |
| Ambient temperature, maximum | +60 °C |
Ambient conditions - Insulation value
| Rated insulation voltage Ui | 250 V |
| Rated impulse withstand voltage Uimp | 4 kV |
Electrical data
| Thermal test current | 10 A |
| Utilisation category AC-15 | 230 VAC |
| Utilisation category AC-15 | 4 A |
| Utilisation category DC-13 | 24 VDC |
| Utilisation category DC-13 | 4 A |
| Switching element | NO contact, NC contact |
| Switching principle | Slow action |
Scope of delivery
| Included in delivery | Actuators must be ordered separately. Ex-certified screwed cable gland |
Notes
| Note (General) | By turning the head in 90° steps, 8 actuating planes are possible. A Torx T10 screwdriver is required for this purpose. Even when the screw is removed, the head is self-retaining. The switch can still not be tampered. |
Наш менеджер свяжется с вами в ближайшее время
