SD-I-DP-V0-2 PROFIBUS-GATEWAY

Бренды по алфавиту:

Eng Рус

Производитель: Schmersal GmbH

Артикул: Л-0043342

Работаем с юридическими лицами, бюджетными организациями, ИП

По вопросам приобретения товара пишите на zakaz@lanfor.ru

Оплата по безналичному расчету согласно выставленному счету

Самовывоз - бесплатно, от 300руб. до пункта выдачи в Вашем городе, доставка от 500руб. "до двери"

PROFIBUS Gateway SD-I-DP-V0-2 to convert serial diagnostic signals to the PROFIBUS DP protocol
The PROFIBUS Gateway SD-I-DP-V0-2 is a PROFIBUS slave
Protection class IP 10 device for control cabinet mounting, for standard DIN rails

Gross weight	120 g

Integral System Diagnostics, status	Yes
Number of LEDs	4

Mounting	Snaps onto standard DIN rail to EN 60715

Terminal Connector	Cage clamps

Degree of protection of the enclosure	IP10
Ambient temperature, minimum	-5 °C
Ambient temperature, maximum	+55 °C
Storage and transport temperature, minimum	-25 °C
Storage and transport temperature, maximum	+85 °C
Resistance to vibrations to EN 60068-2-6	5 ... 9 Hz, Amplitude 3.5 mm 9 ... 150 Hz, with 1 g
Restistance to shock	15 g / 11 ms

Rated insulation voltage U_i	32 V
Rated impulse withstand voltage U_imp	0.5 kV
Overvoltage category	II
Degree of pollution to VDE 0110	2

Rated operating voltage	24 VDC, - 15 % / + 20 % (stabilised PELV)
Operating current	250 mA

Note (LED switching conditions display)	ON permanent light green: supply voltage present PB Flashing signal: PROFIBUS initialisation PB Permanent light red: PROFIBUS error SD Flashing signal: = SD gateway initialisation SD Permanent light Red: = SD Gateway fault

Note (applications)	Safety sensor Guard system

Note (General)	Detailed functions, see programming and configuration manual of the SD Gateway

Note (Wiring diagram)	Serial diagnostics of series-wired safety sensors/solenoid interlocks Devices with serial diagnostic option: AZ 200, AZM 200, CSS 30S, CSS 34, MZM 100