EX-TV10S 335-02Z-3D | Ланфор

Бренды по алфавиту:

Eng Рус

Производитель: Schmersal GmbH

Артикул: Л-0044514

Работаем с юридическими лицами, бюджетными организациями, ИП

По вопросам приобретения товара пишите на zakaz@lanfor.ru

Оплата по безналичному расчету согласно выставленному счету

Самовывоз - бесплатно, от 300руб. до пункта выдачи в Вашем городе, доставка от 500руб. "до двери"

Explosion protection: regulations	EN 60079-31 IEC 60079-0
Explosion protection zones	22
Explosion protection category	3D
Explosion protection designation	D II 3D Ex tc IIIC T90°C Dc X

Standards	EN 60947-5-1 BG-GS-ET-15
Enclosure material	Light alloy die-casting
Enclosure coating material	painted
Material of the actuator	Stainless steel
Material of the contacts, electrical	Silver
Gross weight	116 g

Number of safety contacts	2

Standards	EN ISO 13849-1
Mission Time	20 Year(s)

B10d Normally-closed contact (NC)	20,000,000 Operations

Actuating element	Other
Mechanical life, minimum	1,000,000 Operations
Positive break angle	7 °
Mounting hole for the Shaft	10 mm
Impact energy, maximum	4 J
positive break travel	10.7 mm
Positive break force, minimum	5 N
Note (Positive break force)	per NC
Actuating speed, maximum	1 m/s
Positive break torque	0.6 Nm

Terminal Connector	Screw connection
Cable section, minimum	0.75 mm²
Cable section, maximum	2.5 mm²
Note (Cable section)	All indications about the cable section are including the conductor ferrules.

Degree of protection	IP67
Ambient temperature, minimum	-20 °C
Ambient temperature, maximum	+60 °C

Rated insulation voltage U_i	500 V
Rated impulse withstand voltage U_imp	6 kV

Note (General)	By turning the head in 90° steps, 8 actuating planes are possible. A Torx T10 screwdriver is required for this purpose. Even when the screw is removed, the head is self-retaining. The switch can still not be tampered. Adjustment tool: locking screw to fix, shaft pre-drilled to pin Universal joint available to compensate for axial displacement (only for shaft bore 10 mm)