Контрольное и измерительное оборудование
Оборудование для контроля и учета газов
Автоматизация производственных процессов
Весоизмерительное оборудование
Геодезическое оборудование
Взрывозащищенное и силовое оборудование
Оборудование для обслуживание холодильных систем
Лабораторное оборудование
Строительное и дорожное оборудование
Средства индивидуальной защиты
Инструмент
Оборудование и приборы для работы с элегазом (SF6)
Бренд-зона
Импортные электронные компоненты по онлайн каталогам
Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на zakaz@lanfor.ru
- Actuator monitored
- Thermoplastic enclosure
- Electronic contact-free, coded system
- Max. length of the sensor chain 200 m
- Self-monitoring series-wiring
- 3 LEDs to show operating conditions
- Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
- Intelligent diagnosis
- Manual release
Ordering data
| Note (Delivery capacity) | Phased-out product |
| Product type description | AZM 200 B SK-T-1P2PW |
| Article number (order number) | 101194472 |
| EAN (European Article Number) | 4030661358840 |
| eCl@ss number, Version 9.0 | 27-27-26-03 |
| eCl@ss number, Version 11.0 | 27-27-26-03 |
| Available until | 31.12.2020 |
Approval - Standards
| Certificates | TÜV cULus EAC |
General data
| Standards | IEC 61508 EN 60947-5-1 EN ISO 13849-1 |
| Active principle | inductive |
| Enclosure material | Glass-fibre, reinforced thermoplastic |
| Gross weight | 600 g |
| Time to readiness, maximum | 4,000 ms |
| Reaction time, maximum | 60 ms |
| Duration of risk, maximum | 120 ms |
General data - Features
| Power to unlock | Yes |
| Actuator monitored | Yes |
| Manual release | Yes |
| Short circuit detection | Yes |
| Short-circuit recognition | Yes |
| Series-wiring | Yes |
| Safety functions | Yes |
| Integral System Diagnostics, status | Yes |
| Number of safety contacts | 2 |
Safety appraisal
| Standards | IEC 60947-5-3 IEC 61508 |
| Mission Time | 20 Year(s) |
Safety appraisal - Interlocking
| Performance level, up to | e |
| Control category | 4 |
| PFH-value | 4.00 x 10⁻⁹ /h |
| PFD value | 1.00 x 10⁻⁴ |
| Safety Integrity Level (SIL), suitable for applications in | 3 |
| Mission Time | 20 Year(s) |
Mechanical data
| Mechanical life, minimum | 1,000,000 Operations |
| Clamping force in accordance with ISO14119 Fzh | 2,000 N |
| Clamping force, maximum Fmax | 2,600 N |
| Latching force | 30 N |
| Actuating speed, maximum | 0.2 m/s |
Mechanical data - Connection technique
| Terminal Connector | Screw connection |
| Cable section, minimum | 0.25 mm² |
| Cable section, maximum | 1.5 mm² |
| Note (Cable section) | All indications about the cable section are including the conductor ferrules. |
| Wire cross-section, minimum | 23 AWG |
| Wire cross-section, maximum | 15 AWG |
Mechanical data - Dimensions
| Length of sensor | 50 mm |
| Width of sensor | 40 mm |
| Height of sensor | 220 mm |
Ambient conditions
| Degree of protection | IP67 to EN 60529 |
| Ambient temperature, minimum | -25 °C |
| Ambient temperature, maximum | +60 °C |
| Storage and transport temperature, minimum | -25 °C |
| Storage and transport temperature, maximum | +85 °C |
| Relative humidity, minimum | 30 % |
| Relative humidity, maximum | 95 % |
| Note (Relative humidity) | non-condensing |
| Resistance to vibrations to EN 60068-2-6 | 10 … 55 Hz, amplitude 1 mm |
| Restistance to shock | 30 g / 11 ms |
| Protection rating | II |
Ambient conditions - Insulation value
| Rated insulation voltage Ui | 32 VDC |
| Rated impulse withstand voltage Uimp | 0.8 kV |
| Overvoltage category | III |
| Degree of pollution to VDE 0100 | 3 |
Electrical data
| Operating voltage, minimum | 20.4 VDC |
| Operating voltage, maximum | 26.4 VDC |
| No-load supply current I0 | 600 mA |
| Operating current | 50 mA |
| Switching frequency, approx. | 1 Hz |
Electrical data - Solenoid control
| Switching thresholds | -3 V … 5 V (Low) 15 V … 30 V (High) |
Electrical data - Fail-safe digital inputs
| Switching thresholds | −3 V … 5 V (Low) 15 V … 30 V (High) |
Electrical data - Fail-safe digital outputs
| Rated operating current (safety outputs) | 250 mA |
| Voltage drop Ud, maximum | 4 V |
| Current leakage Ir | 0.5 mA |
| Voltage, Utilisation category DC13 | 24 VDC |
| Current, Utilisation category DC13 | 0.25 A |
Electrical data - Diagnostic output
| Voltage drop Ud, maximum | 4 V |
| Voltage, Utilisation category DC13 | 24 VDC |
| Current, Utilisation category DC13 | 0.05 A |
Status indication
| Note (LED switching conditions display) | Operating condition: LED green Error / functional defect: LED red Supply voltage UB: LED green |
Scope of delivery
| Included in delivery | Actuators must be ordered separately. Triangular key for AZM 200 |
Accessory
| Recommendation (actuator) | AZ/AZM 200-B1 |
Notes
| Note (General) | As long as the actuating unit remains inserted in the solenoid interlock, the unlocked safety guard can be relocked. In this case, the safety outputs are re-enabled, so that the safety guard must not be opened. |
Наш менеджер свяжется с вами в ближайшее время
