- 3 levels OFF-ON-OFF
- Thermoplastic enclosure
- 1 Cable entry M 20 x 1.5
- Good resistance to oil and petroleum spirit
- Particularly fit for robot applications in accordance with the ANSI Robotics Standard
- The redundant contact configuration enables signal processing using conventional safety relay modules
- Contacts do not close upon reset (level 3 ->, level 1)
Ordering data
Product type description | ZSD6/O.LTG |
Article number (order number) | 101199480 |
eCl@ss number, Version 9.0 | 27-37-12-38 |
eCl@ss number, Version 11.0 | 27-37-12-38 |
ETIM number, version 6.0 | EC002571 |
ETIM number, version 7.0 | EC002571 |
Approval - Standards
Certificates | cULus |
General data
Standards | IEC 60947-5-1 IEC 60204-1 EN 775 ISO 12100 ISO 11161 ISO 10218 UL508 1 CSA C22.2 Nr.14 JIS C8201-5-1 ANSI/RIA R15.06 |
Enclosure material | Plastic, thermoplastic, self-extinguishing |
Material of the contacts, electrical | Silver |
Gross weight | 180 g |
General data - Features
Push button, additionally | Yes |
Number of openers | 1 |
Number of shutters | 4 |
Mechanical data
Note (Mechanical lifetime) | NO: |
Mechanical data - Connection technique
Terminal Connector | Screw connection |
Cable section, minimum | 0.14 mm² |
Cable section, maximum | 1.5 mm² |
Ambient conditions
Degree of protection | IP65 |
Ambient temperature, minimum | -10 °C |
Ambient temperature, maximum | +60 °C |
Ambient conditions - Insulation value
Rated impulse withstand voltage Uimp | 1.5 kV |
Electrical data
Rated operating voltage | 250 VAC 250 VDC |
Operating current | 3,000 mA |
Switching element | NO contact, NC contact |
Switching principle | Slow action |
Switching frequency | 1,200 /h |
Accessory
Recommended safety switchgear | SRB, 2-channel with cross-wire detection |
Notes
Note (General) | Customer-specific versions, with connecting cable, are available upon request. The monitoring module must offer the possibility of cross-wire monitoring. Only a double shielded cable is authorised as supply line. 1) If the device is to be used in a damp room, a suitable connection cable must be used. 1) This device has been tested for impact and fire resistance according to UL508. |