SHGV/ESS21S2/111/103 | Ланфор

Бренды по алфавиту:

Eng Рус

Производитель: Schmersal GmbH

Артикул: Л-0045785

Работаем с юридическими лицами, бюджетными организациями, ИП

По вопросам приобретения товара пишите на zakaz@lanfor.ru

Оплата по безналичному расчету согласно выставленному счету

Самовывоз - бесплатно, от 300руб. до пункта выдачи в Вашем городе, доставка от 500руб. "до двери"

Use in applications without dangerous run-on movements resp. run-on movements less than the key transfer time
HS locking system-compatible versions possible
Key switch including mounting flange and contact element

Certificates	TÜV cULus CCC

Standards	IEC 60947-5-1 EN ISO 14119 IEC/EN 60947-1
Versions	Key - Selector switch - Front plate mounting
Installation conditions (mechanical)	arbitrarily
Sealing type	Membrane Lip gaskets Form seals
Enclosure material	Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Material of the contacts, electrical	Silver
Material of the cylinder lock	Steel
Material of the front ring	Aluminium
Colour of the cylinder lock	Silver
Colour of the Contact element	Black
Colour of the front ring	Silver
Colour of key head	Silver
Gross weight	136 g

Latching	Yes
Fully insulated	Yes
Number of auxiliary contacts	1
Number of plunger	1
Number of switch positions	2

Unlocking	Rotating unlatcher
Key withdrawal position	Position I 90°
Latching position	right
Mechanical life, minimum	100,000 Operations
Mounting	mounting flange
Tightening torque of the screw	0.6 Nm
Key number	CODE_KEY_NUMBER111

Terminal Connector	Screw connection
Cable section, minimum	0.5 mm², rigid 0.5 mm², flexible
Cable section, maximum	2.5 mm², rigid 2.5 mm², flexible
Note (Cable section)	All indications about the cable section are including the conductor ferrules.
Tightening torque of Clips	1 Nm

Length x Width x Height	Height with key (and contact element): 60 mm (119 mm)
Diameter of the front ring	29.5 mm
diameters for the cylinder lock	22 mm
Diameter hole	22.3 mm
Diameter hole, with tolerance indication	22.3 + 0.4 mm
Thickness, of the front panel, minimum	1 mm
Thickness of the front panel, maximum	6 mm
Spacing	40 x 50 mm

Degree of protection	IP65
Degree of protection of the switch rooms	IP40
Degree of protection of clips or terminals	IP20
Ambient temperature, minimum	-25 °C
Ambient temperature, maximum	+75 °C
Restistance to shock	110 g / 4 ms
Resistant to vibration	Resistance to vibration: 20 g / 10…200 Hz

Rated insulation voltage U_i	400 V