ZSD6/5M | Ланфор

Бренды по алфавиту:

Eng Рус

Производитель: Schmersal GmbH

Артикул: Л-0045854

Работаем с юридическими лицами, бюджетными организациями, ИП

По вопросам приобретения товара пишите на zakaz@lanfor.ru

Оплата по безналичному расчету согласно выставленному счету

Самовывоз - бесплатно, от 300руб. до пункта выдачи в Вашем городе, доставка от 500руб. "до двери"

Thermoplastic enclosure
1 Cable entry M 20 x 1.5
Good resistance to oil and petroleum spirit
Particularly fit for robot applications in accordance with the ANSI Robotics Standard
The redundant contact configuration enables signal processing using conventional safety relay modules
Contacts do not close upon reset (level 3 ->, level 1)

Certificates	cULus

Standards	IEC 60947-5-1 IEC 60204-1 EN 775 ISO 12100 ISO 11161 ISO 10218 UL508 1 CSA C22.2 Nr.14 JIS C8201-5-1 ANSI/RIA R15.06
Enclosure material	Plastic, thermoplastic, self-extinguishing
Material of the contacts, electrical	Silver
Gross weight	380 g

Note (Mechanical lifetime)	NO: Stage 1 - 2 - 1: 1,000,000 operations Stage 1 - 2 - 3 - 1: 100,000 operations

Degree of protection	IP65
Ambient temperature, minimum	-10 °C
Ambient temperature, maximum	+60 °C

Rated impulse withstand voltage U_imp	1.5 kV

Recommended safety switchgear	SRB, 2-channel with cross-wire detection

Note (General)	Customer-specific versions, with connecting cable, are available upon request. The monitoring module must offer the possibility of cross-wire monitoring. Only a double shielded cable is authorised as supply line. 1) If the device is to be used in a damp room, a suitable connection cable must be used. 1) This device has been tested for impact and fire resistance according to UL508.