Контрольное и измерительное оборудование
Оборудование для контроля и учета газов
Автоматизация производственных процессов
Весоизмерительное оборудование
Геодезическое оборудование
Взрывозащищенное и силовое оборудование
Оборудование для обслуживание холодильных систем
Лабораторное оборудование
Строительное и дорожное оборудование
Средства индивидуальной защиты
Инструмент
Оборудование и приборы для работы с элегазом (SF6)
Бренд-зона
Импортные электронные компоненты по онлайн каталогам
Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на zakaz@lanfor.ru
- Actuator monitored
- Connector M12, 8-pole
- Power to lock
- serial diagnostic output
- Automatic latching
- Solenoid interlocks (for the protection of man) with innovating and unique operating principle
- 40 mm x 179 mm x 40 mm
- Electronic contact-free, coded system
- Thermoplastic enclosure
- Max. length of the sensor chain 200 m
- 3 LEDs to show operating conditions
- Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
- Intelligent diagnosis
- Self-monitoring series-wiring
- Patented
Ordering data
| Product type description | MZM 100 B ST2-SD2PREM-A |
| Article number (order number) | 101211153 |
| EAN (European Article Number) | 4030661389431 |
| eCl@ss number, Version 9.0 | 27-27-26-03 |
| eCl@ss number, Version 11.0 | 27-27-26-03 |
Approval - Standards
| Certificates | TÜV cULus EAC |
General data
| Standards | IEC 61508 EN 60947-5-3 EN ISO 13849-1 EN ISO 14119 |
| general information | Universal coding |
| Coding level according to ISO 14119 | Low |
| Active principle | inductive |
| Enclosure material | Glass-fibre, reinforced thermoplastic |
| Gross weight | 620 g |
| Time to readiness, maximum | 4,000 ms |
| Reaction time, maximum | 150 ms |
| Duration of risk, maximum | 150 ms |
General data - Features
| Power to lock | Yes |
| Actuator monitored | Yes |
| Serial diagnostics | Yes |
| Latching | Yes |
| Short circuit detection | Yes |
| Short-circuit recognition | Yes |
| Series-wiring | Yes |
| Safety functions | Yes |
| Integral System Diagnostics, status | Yes |
| Number of safety contacts | 2 |
| Number of Series-wiring of sensors | 31 |
Safety appraisal
| Standards | IEC 61508 EN ISO 13849-1 |
Safety appraisal - Interlocking
| Performance level, up to | e |
| Control category | 4 |
| PFH-value | 3.54 x 10⁻⁹ /h |
| Safety Integrity Level (SIL), suitable for applications in | 3 |
| Mission Time | 20 Year(s) |
Mechanical data
| Mechanical life, minimum | 1,000,000 Operations |
| Note (Mechanical lifetime) | Actuating speed < 0.5=''> Operations for door weights ≤ 5 kg |
| Clamping force, typically | 750 N |
| Clamping force, guaranteed | 500 N |
| Latching force, minimum | 45 N |
| Latching force, maximum | 115 N |
Mechanical data - Connection technique
| Terminal Connector | Connector M12, 8-pole |
Mechanical data - Dimensions
| Length of sensor | 40 mm |
| Width of sensor | 40 mm |
| Height of sensor | 179 mm |
Ambient conditions
| Degree of protection | IP65 to EN 60529 IP67 to EN 60529 |
| Ambient temperature, minimum | -25 °C |
| Ambient temperature, maximum | +55 °C |
| Storage and transport temperature, minimum | -25 °C |
| Storage and transport temperature, maximum | +70 °C |
| Relative humidity, minimum | 30 % |
| Relative humidity, maximum | 95 % |
| Note (Relative humidity) | non-condensing non-icing |
| Resistance to vibrations to EN 60068-2-6 | 10 … 150 Hz, amplitude 0.35 mm |
| Restistance to shock | 30 g / 11 ms |
| Protection rating | III |
Ambient conditions - Insulation value
| Rated insulation voltage Ui | 32 VDC |
| Rated impulse withstand voltage Uimp | 0.8 kV |
| Overvoltage category | III |
| Degree of pollution to VDE 0100 | 3 |
Electrical data
| Operating voltage, minimum | 20.4 VDC |
| Operating voltage, maximum | 26.4 VDC |
| No-load supply current I0 | 600 mA |
| Operating current | 50 mA |
| Required rated short-circuit current to EN 60947-5-1 | 100 A |
| Note | Cable length and cable section alter the voltage drop depending on the output current |
| Switching frequency, maximum | 1 Hz |
Electrical data - Solenoid control
| Switching thresholds | -3 V … 5 V (Low) 15 V … 30 V (High) |
| Classification ZVEI CB24I, Sink | C0 |
| Classification ZVEI CB24I, Source | C1 C2 C3 |
Electrical data - Fail-safe digital inputs
| Switching thresholds | −3 V … 5 V (Low) 15 V … 30 V (High) |
| Classification ZVEI CB24I, Sink | C1 |
| Classification ZVEI CB24I, Source | C1 C2 C3 |
Electrical data - Fail-safe digital outputs
| Rated operating current (safety outputs) | 250 mA |
| Voltage drop Ud, maximum | 1 V |
| Current leakage Ir | 0.5 mA |
| Voltage, Utilisation category DC13 | 24 VDC |
| Current, Utilisation category DC13 | 0.25 A |
| Classification ZVEI CB24I, Source | C1 |
| Classification ZVEI CB24I, Sink | C1 |
Electrical data - Diagnostic output
| Voltage drop Ud, maximum | 2 V |
| Voltage, Utilisation category DC13 | 24 VDC |
| Current, Utilisation category DC13 | 0.05 A |
Status indication
| Note (LED switching conditions display) | Operating condition: LED green Error / functional defect: LED red Supply voltage UB: LED green |
Pin assignment
| PIN 1 | A1 Supply voltage UB |
| PIN 2 | X1 Safety input 1 |
| PIN 3 | A2 GND |
| PIN 4 | Y1 Safety output 1 |
| PIN 5 | OUT serial diagnostic output |
| PIN 6 | X2 Safety input 2 |
| PIN 7 | Y2 Safety output 2 |
| PIN 8 | IN serial diagnostic input |
Scope of delivery
| Included in delivery | Actuators must be ordered separately. |
Accessory
| Recommendation (actuator) | MZM 100-B1.1 |
Notes
| Note (General) | As long as the actuating unit is applied to the solenoid interlock, the unlocked safety guard can be relocked. In this case, the safety outputs are re-enabled, so that the safety guard must not be opened. |
Наш менеджер свяжется с вами в ближайшее время
