AZM201D-ST2-T-1P2P2P | Ланфор

Бренды по алфавиту:

Eng Рус

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Стоимость уточняйте у менеджера

Производитель: Schmersal GmbH

Артикул: Л-0045591

Запросить цену

Работаем с юридическими лицами, бюджетными организациями, ИП

По вопросам приобретения товара пишите на zakaz@lanfor.ru

Оплата по безналичному расчету согласно выставленному счету

Самовывоз - бесплатно, от 300руб. до пункта выдачи в Вашем городе, доставка от 500руб. "до двери"

Thermoplastic enclosure
Coding in accordance to ISO 14119 by using RFID-Technology
3 LEDs to show operating conditions
Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
Suitable for hinged and sliding guards
Intelligent diagnosis
Manual release
Protection class IP66, IP67
High holding force 2000
2 OSSD safety outputs for guard door monitoring
2 OSSD safety outputs for guard locking monitoring
symmetrical construction form, assembly on 40mm profiles
Emergency exit / Emergency release suitable for retrofitting

Ordering data

Product type description	AZM201D-ST2-T-1P2P2P
Article number (order number)	103026879
EAN (European Article Number)	4030661555515
eCl@ss number, Version 9.0	27-27-26-03
eCl@ss number, Version 11.0	27-27-26-03

Approval - Standards

Certificates	TÜV cULus EAC FCC IC

General data

Standards

EN ISO 13849-1

IEC 61508

IEC 60947-5-3

EN ISO 14119

IEC 62061

general information

Universal coding

Coding level according to ISO 14119

Low

Active principle

RFID

Enclosure material

Glass-fibre, reinforced thermoplastic

Gross weight

588 g

Time to readiness, maximum

4,000 ms

Duration of risk, maximum

200 ms

Response time safety outputs in case of switch-off by actuator, maximum

100 ms

Response time safety outputs in case of switch-off by safety inputs, maximum

0.5 ms

General data - Features

Power to unlock	Yes
Actuator monitored	Yes
Guard locking monitored	Yes
Manual release	Yes
Short circuit detection	Yes
Short-circuit recognition	Yes
Safety functions	Yes
Integral System Diagnostics, status	Yes
Number of safety contacts	4

Safety appraisal

Standards	EN ISO 13849-1 IEC/EN 62061 IEC 61508

Safety appraisal - Interlocking

Performance level, up to	e
Control category	4
PFH-value	5.70 x 10⁻¹⁰ /h
PFD value	5.00 x 10⁻⁵
Safety Integrity Level (SIL), suitable for applications in	3
Mission Time	20 Year(s)

Safety appraisal - Interlocking 2

Performance Level, up to	d
Control category	3
Safety Integrity Level (SIL), suitable for applications in	2
Mission time	20 Year(s)

Safety appraisal - Guard locking

Mission Time	20 Year(s)

Mechanical data

Mechanical life, minimum	1,000,000 Operations
Clamping force in accordance with ISO14119 F_zh	2,000 N
Clamping force, maximum F_max	2,600 N
Latching force	30 N
Actuating speed, maximum	0.2 m/s

Mechanical data - Connection technique

Terminal Connector	Connector M12, 8-pole

Mechanical data - Dimensions

Length of sensor	50 mm
Width of sensor	40 mm
Height of sensor	220 mm

Ambient conditions

Degree of protection	IP66 to EN 60529 IP67 to EN 60529
Ambient temperature, minimum	-25 °C
Ambient temperature, maximum	+60 °C
Storage and transport temperature, minimum	-25 °C
Storage and transport temperature, maximum	+85 °C
Relative humidity, minimum	30 %
Relative humidity, maximum	95 %
Note (Relative humidity)	non-condensing
Resistance to vibrations to EN 60068-2-6	10 … 150 Hz, amplitude 0.35 mm
Restistance to shock	30 g / 11 ms
Protection rating	III

Ambient conditions - Insulation value

Rated insulation voltage U_i	32 VDC
Rated impulse withstand voltage U_imp	0.8 kV
Overvoltage category	III
Degree of pollution to VDE 0100	3

Electrical data

Operating voltage, minimum	20.4 VDC
Operating voltage, maximum	26.4 VDC
No-load supply current I₀	50 mA
Current consumption with solenoid ON, peak	700 mA / 100 ms
Operating current	1,200 mA
Switching frequency, approx.	1 Hz

Electrical data - Solenoid control

Switching thresholds	-3 V … 5 V (Low) 15 V … 30 V (High)
Classification ZVEI CB24I, Sink	C0
Classification ZVEI CB24I, Source	C1 C2 C3

Electrical data - Fail-safe digital inputs

Switching thresholds	−3 V … 5 V (Low) 15 V … 30 V (High)
Classification ZVEI CB24I, Sink	C1
Classification ZVEI CB24I, Source	C1 C2 C3

Electrical data - Fail-safe digital outputs

Rated operating current (safety outputs)	250 mA
Voltage drop U_d, maximum	4 V
Current leakage I_r	0.5 mA
Voltage, Utilisation category DC13	24 VDC
Current, Utilisation category DC13	0.25 A
Note, Utilisation category DC13	Gilt für die Ausgänge Y1 und Y2
Classification ZVEI CB24I, Source	C2
Classification ZVEI CB24I, Sink	C1 C2

Electrical data - Diagnostic output

Operating current	100 mA
Voltage drop U_d, maximum	4 V
Voltage, Utilisation category DC13	24 VDC
Current, Utilisation category DC13	0.05 A

Status indication

Note (LED switching conditions display)	Operating condition: LED green Error / functional defect: LED red Supply voltage UB: LED green

Pin assignment

PIN 1	A1 Supply voltage UB
PIN 2	ELEC_DATA_CONNECTOR_1_PIN_ASSIGNMENT_2OUT
PIN 3	A2 GND
PIN 4	Y1 Safety output 1
PIN 5	ELEC_DATA_CONNECTOR_1_PIN_ASSIGNMENT_5Y3
PIN 6	ELEC_DATA_CONNECTOR_1_PIN_ASSIGNMENT_6Y4
PIN 7	Y2 Safety output 2
PIN 8	IN Solenoid control

Scope of delivery

Included in delivery	Actuators must be ordered separately. Triangular key for AZM 201

Accessory

Recommendation (actuator)	AZ/AZM201-B1 AZ/AZM201-B30

Notes

Note (General)	As long as the actuating unit remains inserted in the solenoid interlock, the unlocked safety guard can be relocked. In this case, the safety outputs are re-enabled, so that the safety guard must not be opened.
Note (Actuator monitored)	Safety outputs Y1, Y2
Note (Guard locking monitored)	Safety outputs Y3, Y4