AZM190-11/01RK-24VDC | Ланфор

Бренды по алфавиту:

Eng Рус

Производитель: Schmersal GmbH

Артикул: Л-0044271

Работаем с юридическими лицами, бюджетными организациями, ИП

По вопросам приобретения товара пишите на zakaz@lanfor.ru

Оплата по безналичному расчету согласно выставленному счету

Самовывоз - бесплатно, от 300руб. до пункта выдачи в Вашем городе, доставка от 500руб. "до двери"

Manual release
Thermoplastic enclosure
Long life
Interlock with protection against incorrect locking.
89 mm x 178 mm x 41 mm
Actuating head can be repositioned by 4 x 90°
2 cable entries M 20 x 1.5
Wiring compartment
Slim design, particularly suitable for fitting on hinged doors, aluminium profiles and fencing
Sealing mechanism to prevent the ingress of dirt
Cut clamp termination

Certificates	TÜV cULus CCC EAC

Standards	EN 60947-5-1 BG-GS-ET-19
Coding level according to ISO 14119	Low
Active principle	electromechanical
Enclosure material	Glass-fibre, reinforced thermoplastic
Material of the contacts, electrical	Silver
Gross weight	480 g

Power to unlock	Yes
Manual release	Yes
Number of actuating directions	4
Number of auxiliary contacts	1
Number of safety contacts	2

Standards	EN ISO 13849-1
Mission Time	20 Year(s)

B10d Normally-closed contact (NC)	2,000,000 Operations
B10d Normally open contact (NO)	1,000,000 Operations

Mechanical life, minimum	1,000,000 Operations
Clamping force	1,950 N
Latching force	20 N
Positive break force, minimum	20 N
Actuating speed, maximum	0.3 m/s

Terminal Connector	Screw terminals
Cable section, minimum	1 x 0.5 mm²
Cable section, maximum	1 x 1.5 mm²
Note (Cable section)	All indications about the cable section are including the conductor ferrules.

Degree of protection	IP67 to EN 60529
Ambient temperature, minimum	+0 °C
Ambient temperature, maximum	+50 °C

Rated insulation voltage U_i	250 V
Rated impulse withstand voltage U_imp	4 kV

Thermal test current	4 A
Rated control voltage	24 VDC
Required rated short-circuit current to EN 60947-5-1	1,000 A
Electrical power consumption, maximum	8.5 W
Switching element	NO contact, NC contact
Switching principle	Creep circuit element
Switching frequency	1.2 /h

Voltage, Utilisation category AC15	230 VAC
Current, Utilisation category AC-15	4 A
Voltage, Utilisation category DC13	24 VDC
Current, Utilisation category DC13	4 A

Voltage, Utilisation category AC15	230 VAC
Current, Utilisation category AC-15	4 A
Voltage, Utilisation category DC13	24 VDC
Current, Utilisation category DC13	4 A