Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на zakaz@lanfor.ru
Preset counters1 preset, timer programmable
- Preset counter with one preset
- Display 5-digits
- Operating mode, start count, scaling factor programmable
- Connection: Incremental encoder or digital sensors
- Time meter with four time ranges
- Time relay with operation and release delay
- Programmable as a time counter
Technical data - electrical ratings
- Voltage supply
- 85...265 VAC (50/60 Hz)
- 24 VDC ±10 %
- Power consumption
- 5 VA
- 5 W
- Sensor supply
- 85...265 VAC: 24 VDC ±20 %/100 mA
- 24 VDC: 24 VDC ±20 %/100 mA
- Display
- LED, 7-segment display
- Number of digits
- 5-digits
- Digit height
- 7,6 mm
- Function
- Preset counter
- Main counter with 1 preset
- Scaling factor
- 0.001...99.999
- Count mode
- Adding or subtracting
- Difference counting A-B
- Total (parallel) A+B
- Up/Down
- A 90° B phase evaluation
- Counting frequency
- 15 Hz, 10 kHz (set by Dip switch)
- Preset
- 1 preset
- Operating mode
- Main preset
- Time meter / time relay
- Data memory
- >10 years in EEPROM
- Reset
- Button, electric or automatic
- Outputs electronic
- NPN / PNP transistor switch
- Outputs relay
- Change-over contact, floating
- Output holding time
- 0.01...99.99 s
- Standard DIN EN 61010‑1
- Protection class II
- Overvoltage category II
- Pollution degree 2
- Emitted interference
- DIN EN 61000-6-4
- Interference immunity
- DIN EN 61000-6-2
- Programmable parameters
- Operating modes
- Sensor logic
- Scaling factor
- Count mode
- Time relay function
- Approval
- UL approval / E63076
Technical data - mechanical design
- Ambient temperature
- 0...+50 °C
- Storage temperature
- -20...+70 °C
- Relative humidity
- 80 % non-condensing
- Connection
- Plug-in screw terminal connector
- Core cross-section
- 1.5 mm²
- Protection DIN EN 60529
- IP 65 (face with seal)
- Operation / keypad
- Membrane with softkeys
- Housing type
- Built-in housing
- Dimensions W x H x L
- 48 x 48 x 108 mm
- Mounting depth
- 108 mm
- Mounting type
- Clip frame for built-in housing
- Cutout dimensions
- 45 x 45 mm (+0.6)
- Weight approx.
- 150 g (24 VDC/85-265 VAC)
- 260 g (24/48 VAC)
- Material
- Housing: Makrolon 6485 (PC)
- Keypad: Polyester
Baumer_Counters_UL-E63076_EN_COC_81238103.pdf
Baumer_NE210_CAD.zip
Baumer_NE210_DS_EN.pdf
Baumer_NE210_NE211_NE216_DE-EN-FR_CoC_81204995.pdf
Baumer_NE210_OI_DE_EN_81005200.pdf
Baumer_NE210_CAD.zip
Baumer_NE210_DS_EN.pdf
Baumer_NE210_NE211_NE216_DE-EN-FR_CoC_81204995.pdf
Baumer_NE210_OI_DE_EN_81005200.pdf
Наш менеджер свяжется с вами в ближайшее время