Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на zakaz@lanfor.ru
Preset counters2 presets, totalizer and batch counter
- Preset counter with two presets
- Display batch counter, main counter: 6-digits
- Display totalizer: 8-digits
- Batch counter, tachometer, totalizer, hour counter
- Operating mode, start count, scaling factor programmable
- Connection: Incremental encoder or digital sensors
- Preset mode programmable
- Interface RS232, RS422, RS485
Technical data - electrical ratings
- Voltage supply
- 85...265 VAC (50/60 Hz)
- 24 VDC ±10 %
- Power consumption
- 15 VA
- 8 W
- Sensor supply
- 85...265 VAC: 24 VDC ±20 %/200 mA
- 24 VDC: 24 VDC ±20 %/200 mA
- Display
- LED, 7-segment display
- Number of digits
- 8-digits - totalizer
- 6-digits - hour/main/ batch counter, tachometer
- Digit height
- 7,6 mm
- Function
- Preset counter
- Main counter with 2 presets
- Batch counter with 1 preset
- Totalizer
- Hour counter
- Scaling factor
- 0.0001...9999.99
- Multitplier / batch counter
- 1...99
- Count mode
- Adding or subtracting
- Difference counting A-B
- Total (parallel) A+B
- Up/Down
- A 90° B phase evaluation
- Counting frequency
- 15 Hz, 25 Hz, 10 kHz programmable
- Preset
- 2 presets
- Operating mode
- Main preset
- Parallel alignment
- Trailing preset
- Step preset
- Data memory
- >10 years in EEPROM
- Reset
- Button, electric or automatic
- Outputs electronic
- NPN / PNP transistor switch
- Outputs relay
- Potential-free change-over contact for main counter
- Normally open/closed potential-free for B1
- Output holding time
- 0.01...99.99 s
- Interface
- RS232
- RS422
- RS485
- Standard DIN EN 61010‑1
- Protection class II
- Overvoltage category II
- Pollution degree 2
- Emitted interference
- DIN EN 61000-6-4
- Interference immunity
- DIN EN 61000-6-2
- Programmable parameters
- Operating modes
- Sensor logic
- Scaling factor
- Count mode
- Control inputs
- Approval
- UL approval / E63076
Technical data - mechanical design
- Ambient temperature
- 0...+50 °C
- Storage temperature
- -20...+70 °C
- Relative humidity
- 80 % non-condensing
- Connection
- Plug-in screw terminal connector
- Core cross-section
- 1.5 mm²
- Protection DIN EN 60529
- IP 65 (face with seal)
- Operation / keypad
- 10 figure keypad with 5 function keys
- Housing type
- Built-in housing
- Dimensions W x H x L
- 72 x 72 x 108 mm
- Mounting depth
- 108 mm
- Mounting type
- Clip frame for built-in housing
- Cutout dimensions
- 68 x 68 mm (+0.7)
- Weight approx.
- 320 g (24 VDC/85-265 VAC)
- 450 g (24/48 VAC)
- Material
- Housing: Makrolon 6485 (PC)
- Keypad: Polyester
Baumer_Counters_UL-E63076_EN_COC_81238103.pdf
Baumer_NE212-213_Schnittst_OI_DE_EN_81046327.pdf
Baumer_NE212_DS_EN.pdf
Baumer_NE212_NE213_NE215_DE-EN-FR_CoC_81205014.pdf
Baumer_NE212-213_Schnittst_OI_DE_EN_81046327.pdf
Baumer_NE212_DS_EN.pdf
Baumer_NE212_NE213_NE215_DE-EN-FR_CoC_81205014.pdf
Наш менеджер свяжется с вами в ближайшее время