Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на zakaz@lanfor.ru
Encoders without bearings - incrementalSensor head with integrated FPGA signal processing, magnetic sensing
- Robust and wearless
- Electronics is fully encapsulated, high protection
- Large tolerances: axial ±3 mm, radial max. 2.2 mm
- Very compact dimensions
- Simple mounting, easy adaptation
- Several mounting possibilities
- Sensor head with integrated FPGA signal processing
Technical data - electrical ratings
- Interference immunity
- EN 61000-6-2
- Emitted interference
- EN 61000-6-3
- Approval
- CE
- UL approval / E217823
Technical data - electrical ratings (square-wave)
- Voltage supply
- 4.5...30 VDC
- Consumption w/o load
- ≤160 mA
- Pulses per revolution
- 256 … 524288
- Phase shift
- 90 ° ±10°
- Duty cycle
- 40…60 %
- Reference signal
- Zero pulse, width 90°
- Sensing method
- Magnetic
- Output frequency
- ≤2 MHz
- Output signals
- A+, B+, R+, A-, B-, R-
- Output stages
- HTL, TTL/RS422
Technical data - electrical ratings (SinCos)
- Voltage supply
- 4.5...30 VDC
- Consumption w/o load
- ≤160 mA
- Sinewave cycles per revolution
- 256 … 32768
- Phase shift
- 90 ° ±5°
- Reference signal
- Zero pulse, width 90°
- Sensing method
- Magnetic
- Output signals
- A+, B+, R+, A-, B-, R-
- Output stages
- SinCos 1 Vpp
- Difference of SinCos amplitude
- ≤20 mV
- Harmonics typ.
- -40 dB
- DC offset
- ≤20 mV
- Bandwidth
- 400 kHz (-3 dB)
Technical data - mechanical design
- Sensor head
- FPGA signal processing
- Size (flange)
- ø405.4 mm
- Shaft type
- ø70...340 mm (through hollow shaft)
- Axial tolerance
- ±3 mm (wheel/head)
- Radial tolerance
- 0,1…2,2 mm (wheel/head)
- Protection DIN EN 60529
- IP 67 (head)
- IP 68 (wheel)
- Operating speed
- ≤2000 rpm
- Material
- Housing sensing head: aluminium alloy
- Wheel: stainless steel (1.4104)
- Operating temperature
- -20...+85 °C
- Resistance
- IEC 60068-2-6
- Vibration 30 g, 55-2000 Hz
- IEC 60068-2-27
- Shock 300 g, 2 ms
- Accuracy of magnetic measure
- ±75 ″
- Connection
- Flange connector M23, 12-pin
Baumer_Geber_ohne+ATEX_DE-EN-FR_CoC_81201636.pdf
Baumer_MHGP400-B5-G140_CAD.zip
Baumer_MHGP400_DS_EN.pdf
Baumer_MHGP400_II_DE-EN.pdf
Baumer_MHGP400-B5-G140_CAD.zip
Baumer_MHGP400_DS_EN.pdf
Baumer_MHGP400_II_DE-EN.pdf
Наш менеджер свяжется с вами в ближайшее время