Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на zakaz@lanfor.ru
Incremental encodersThrough hollow shaft ø60 to ø85 mm
- Encoder with through hollow shaft max. ø85 mm
- Max. 2500 pulses per revolution
- Optical sensing method
- Mounting hole circle ø162 mm
- TTL or HTL output signals
- Without own bearings
- Cable output radial
Technical data - electrical ratings
- Voltage supply
- 5 VDC ±5 %
- 8...30 VDC
- Reverse polarity protection
- Yes
- Consumption w/o load
- ≤100 mA
- Pulses per revolution
- 1000 … 2500
- Output signals
- A, B, N + inverted
- Output stages
- TTL linedriver (short-circuit proof)
- HTL push-pull (short-circuit proof)
- Reference signal
- Zero pulse, width 90°
- Output frequency
- ≤120 kHz
- Sensing method
- Optical
- Interference immunity
- DIN EN 61000-6-2
- Emitted interference
- DIN EN 61000-6-3
Technical data - mechanical design
- Size (flange)
- ø150 mm
- Shaft type
- ø60...85 mm (through hollow shaft)
- Motor shaft tolerance
- ±0,2 mm axial
- ±0,2 mm radial
- Protection DIN EN 60529
- IP 54
- Operating speed
- ≤3000 rpm
- Material
- Housing: aluminium
- Shaft: aluminium
- Operating temperature
- -20...+70 °C
- Relative humidity
- 90 %
- Resistance
- DIN EN 60068-2-6 Vibration 10 g, 55-2000 Hz
- DIN EN 60068-2-27 Shock 100 g, 11 ms
- Weight approx.
- 1500 g
- Connection
- Cable 1 m
Наш менеджер свяжется с вами в ближайшее время