Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на zakaz@lanfor.ru
Incremental encodersBlind hollow shaft ø6 to ø16 mm
- Encoder with coupling max. ø16 mm
- Max. 1024 pulses per revolution
- Optical sensing method
- Centering alignment ø70 mm, mounting screw hole circle ø77 mm
- TTL or HTL output signals
- Flange connector radial or axial
Technical data - electrical ratings
- Voltage supply
- 5 VDC ±5 %
- 8...30 VDC
- Reverse polarity protection
- Yes
- Consumption w/o load
- ≤100 mA
- Pulses per revolution
- 50 … 1024
- Reference signal
- Zero pulse, width 90°
- Sensing method
- Optical
- Output frequency
- ≤120 kHz
- Output signals
- A, B, N + inverted
- Output stages
- TTL linedriver (short-circuit proof)
- HTL push-pull (short-circuit proof)
- Interference immunity
- DIN EN 61000-6-2
- Emitted interference
- DIN EN 61000-6-3
Technical data - mechanical design
- Size (flange)
- ø58 mm
- Shaft type
- ø6...16 mm (blind hollow shaft)
- Protection DIN EN 60529
- IP 65
- Operating speed
- ≤8000 rpm
- Starting torque
- ≤0,01 Nm (+20 °C)
- Material
- Housing: aluminium, black, powder-coated
- Shaft: stainless steel
- Operating temperature
- -20...+70 °C
- Relative humidity
- 90 % non-condensing
- Resistance
- DIN EN 60068-2-6 Vibration 10 g, 55-2000 Hz
- DIN EN 60068-2-27 Shock 100 g, 11 ms
- Connection
- Connector M23 type 2, 12-pin
- Weight approx.
- 430 g
Наш менеджер свяжется с вами в ближайшее время