Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на zakaz@lanfor.ru
Absolute encodersSolid shaft with synchro flange
- Encoder single- or multiturn / SSI
- Precise magnetic sensing
- Angular accuracy up to ±0.15°
- Resolution max. 32 bit (14 bit ST, 18 bit MT)
- Additional incremental signals
- Clock frequency up to 2 MHz
- High protection up to IP 67
- High resistance to shock and vibrations
Technical data - electrical ratings
- Voltage supply
- 4.5…30 VDC (SSI, SSI + TTL/RS422)
- 5.5…30 VDC (SSI + HTL/Push-pull)
- Consumption typ.
- 60 mA (5 VDC, w/o load)
- 20 mA (24 VDC, w/o load)
- Initializing time
- ≤170 ms after power on
- Data currency
- Typ. 2 µs (cyclic request)
- Interface
- SSI
- SSI + incremental
- Function
- Multiturn
- Singleturn
- Operating mode
- Linear feedback shift register (on request)
- Steps per revolution
- ≤16384 / 14 bit
- Number of revolutions
- ≤262144 / 18 bit
- Absolute accuracy
- ±0,15 ° (+20 ±15 °C)
- ±0,25 ° (-40...+85 °C)
- Sensing method
- Magnetic
- Code
- Gray or binary
- Code sequence
- CW: ascending values with clockwise sense of rotation; looking at flange
- Inputs
- SSI clock: Linereceiver RS422
- Zero setting input
- Counting direction
- Output stages
- SSI data: Linedriver RS422
- Incremental: linedriver RS422 or push-pull (option)
- Incremental output
- 1024, 2048, 4096 ppr (other on request)
- Output signals
- A+, A-, B+, B-
- Output frequency
- ≤350 kHz
- Interference immunity
- DIN EN 61000-6-2
- Emitted interference
- DIN EN 61000-6-4
- Diagnostic function
- DATAVALID (on request)
Technical data - mechanical design
- Size (flange)
- ø36 mm
- Shaft type
- ø10 x 16 mm, solid shaft with flat
- Flange
- Synchro flange
- Protection DIN EN 60529
- IP 65 (without shaft seal)
- IP 67 (with shaft seal)
- Operating speed
- ≤6000 rpm
- Starting torque
- ≤2 Ncm (+20 °C, IP 65)
- ≤2,5 Ncm (+20 °C, IP 67)
- Moment of inertia
- 15,38 gcm²
- Admitted shaft load
- ≤40 N axial
- ≤80 N radial
- Material
- Housing: steel zinc-coated
- Flange: aluminium
- Shaft: stainless steel
- Operating temperature
- -40...+85 °C (see general information)
- Relative humidity
- 95 %
- Resistance
- DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz
- DIN EN 60068-2-27 Shock 500 g, 1 ms
- Weight approx.
- 170 g
- Connection
- Flange connector M12, 8-pin
- Flange connector M12, 12-pin
- Cable 2 m
Baumer_EAM360-SWA_5Lxx_xxxxx_A-stp_CAD.zip
Baumer_EAM360_DE-EN-FR_CoC_81240036.pdf
Baumer_EAM360_SSI_II_A4_DE_EN_FR_IT_ES_81237066.pdf
Baumer_EAM360_solid_shaft_SSI_DS_EN.pdf
Baumer_EAM580_EAM360_BR_EN_1806_11202518_LRes.pdf
Baumer_EAM360_DE-EN-FR_CoC_81240036.pdf
Baumer_EAM360_SSI_II_A4_DE_EN_FR_IT_ES_81237066.pdf
Baumer_EAM360_solid_shaft_SSI_DS_EN.pdf
Baumer_EAM580_EAM360_BR_EN_1806_11202518_LRes.pdf
Наш менеджер свяжется с вами в ближайшее время