Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на zakaz@lanfor.ru
Absolute encodersSolid shaft ø10 mm with clamping flange
- Encoder single- or multiturn / SSI + resolver
- Two-in-one measuring system
- Magnetic sensing method
- Resolution: singleturn 12 bit, multiturn 12 bit
- Self-diagnostic
- Electronic zero point adjustment
- Built-in preset button
Technical data - electrical ratings
- Voltage supply
- 10...30 VDC
- Reverse polarity protection
- Yes
- Consumption w/o load
- ≤60 mA (24 VDC)
- Interface
- SSI
- Function
- Multiturn
- Steps per revolution
- 4096 / 12 bit
- Number of revolutions
- 4096 / 12 bit
- Sensing method
- Magnetic
- Code
- Gray or binary
- Code sequence
- CW: ascending values with clockwise sense of rotation; looking at mounting surface
- Output stages
- SSI data: linedriver RS485
- Diagnostic output: error
- Interference immunity
- DIN EN 61000-6-2
- Emitted interference
- DIN EN 61000-6-3
- Diagnostic function
- Self-diagnosis
- Number of pole pairs
- 1 = 2 poles
- Input voltage Ui
- 7 Vrms
- Input frequency
- ≤10 kHz
- Transformation ratio
- 0.5 ±5 %
- Phase shift
- 0° ±10°
- Electrical error max.
- 10 Angular minutes
Technical data - mechanical design
- Size (flange)
- ø58 mm
- Shaft type
- ø10 mm solid shaft
- Flange
- Clamping flange
- Protection DIN EN 60529
- IP 65
- IP 67 (at shaft entrance)
- Operating speed
- ≤5000 rpm (mechanical)
- ≤8000 rpm (electric)
- Starting torque
- ≤0,05 Nm (+20 °C)
- Admitted shaft load
- ≤40 N axial
- ≤60 N radial
- Material
- Housing: aluminium
- Shaft: stainless steel
- Operating temperature
- -30...+85 °C
- Relative humidity
- 90 % non-condensing
- Resistance
- DIN EN 60068-2-6 Vibration 10 g, 55-2000 Hz
- DIN EN 60068-2-27 Shock 30 g, 11 ms
- Weight approx.
- 400 g
- Connection
- Connector M23 type 2, 17-pin
Наш менеджер свяжется с вами в ближайшее время