Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на zakaz@lanfor.ru
Absolute encodersSolid shaft with clamping or synchro flange
- Encoder multiturn / bus cover
- Optical sensing method
- Resolution: singleturn 13 bit, multiturn 16 bit
- Clamping or synchro flange
- High resistance to shock and vibrations
- CANopen®/DeviceNet/EtherCAT/EtherNet-IP SAEJ1939/PROFINET/POWERLINK/Profibus/SSI
- Code continuity check optional by bus
- Two incremental tracks A and B
- Maximum resistant against magnetic fields
Technical data - electrical ratings
- Voltage supply
- 10...30 VDC
- Reverse polarity protection
- Yes
- Consumption w/o load
- ≤100 mA (24 VDC)
- Initializing time typ.
- 250 ms after power on
- Interface
- CANopen®
- DeviceNet
- EtherCAT
- EtherNet/IP
- Profibus
- PROFINET
- POWERLINK
- SAE J1939
- SSI
- Function
- Multiturn
- Device adress
- Rotary switch in bus cover (type-specific)
- Steps per revolution
- ≤8192 / 13 bit
- Number of revolutions
- ≤65536 / 16 bit
- Absolute accuracy
- ±0,025 °
- Sensing method
- Optical
- Code
- Binary
- Code sequence
- CW/CCW programmable
- Output stages
- Push-pull short-circuit proof
- RS422
- Incremental output
- 2048 pulses A90°B + inverted
- Interference immunity
- DIN EN 61000-6-2
- Emitted interference
- DIN EN 61000-6-4
- Programmable parameters
- Steps per revolution
- Number of revolutions
- Preset
- Scaling
- Rotating direction
- Diagnostic function
- Position or parameter error
- Multiturn sensing
- Status indicator
- DUO-LED integrated in bus cover
- Approval
- UL approval / E63076
Technical data - mechanical design
- Size (flange)
- ø58 mm
- Shaft type
- ø10 mm solid shaft (clamping flange)
- ø6 mm solid shaft (synchro flange)
- Flange
- Clamping or synchro flange
- Protection DIN EN 60529
- IP 54 (without shaft seal)
- IP 65 (with shaft seal)
- Operating speed
- ≤10000 rpm (mechanical)
- ≤6000 rpm (electric)
- Starting acceleration
- ≤1000 U/s²
- Starting torque
- ≤0,01 Nm (+25 °C, IP 54)
- ≤0,015 Nm (+25 °C, IP 65)
- Rotor moment of inertia
- 20 gcm²
- Admitted shaft load
- ≤20 N axial
- ≤40 N radial
- Material
- Housing: steel
- Flange: aluminium
- Bus cover: aluminium
- Operating temperature
- -25...+85 °C
- -40...+85 °C (optional)
- Relative humidity
- 95 % non-condensing
- Resistance
- DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz
- DIN EN 60068-2-27 Shock 200 g, 6 ms
- Weight approx.
- 670 g
- Connection
- Bus cover
Baumer_Bushaube_Welle-Endwelle_DS_EN.pdf
Baumer_CANopenToolsuite_MA.zip
Baumer_Encoders_UL-E63076_EN_COC_81223928.pdf
Baumer_GC_GB_GXA_GEMMW_SAEJ1939_II_DE_EN_81172917.pdf
Baumer_GXMMW_Incremental_DS_EN.pdf
Baumer_GXMMW_SW.zip
Baumer_GxMMS_GxMMW_DE-EN-FR_CoC_81107467.pdf
Baumer_CANopenToolsuite_MA.zip
Baumer_Encoders_UL-E63076_EN_COC_81223928.pdf
Baumer_GC_GB_GXA_GEMMW_SAEJ1939_II_DE_EN_81172917.pdf
Baumer_GXMMW_Incremental_DS_EN.pdf
Baumer_GXMMW_SW.zip
Baumer_GxMMS_GxMMW_DE-EN-FR_CoC_81107467.pdf
Наш менеджер свяжется с вами в ближайшее время