Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на zakaz@lanfor.ru
Absolute encodersSolid shaft with clamping or synchro flange
- Encoder multiturn / parallel
- Optical sensing method
- Resolution: singleturn 12 bit, multiturn 12 bit
- Clamping or synchro flange
- Resolution, code and preset programmable
- Encoder programming by Windows software
- RS232 encoder programming interface
Technical data - electrical ratings
- Voltage supply
- 10...30 VDC
- Reverse polarity protection
- Yes
- Consumption w/o load
- ≤50 mA (24 VDC)
- Initializing time typ.
- 50 ms after power on
- Interface
- 24 parallel outputs
- Function
- Multiturn
- Steps per revolution
- ≤4096 / 12 bit
- Number of revolutions
- ≤4096 / 12 bit
- Absolute accuracy
- ±0,03 °
- Sensing method
- Optical
- Code
- Gray, cut gray, BCD, binary programmable
- Code sequence
- CW/CCW coded and programmable by connection
- Inputs
- TxD, RxD (RS232)
- Control signals UP/DOWN inv. and zero
- ENABLE inv.
- STORE inv.
- Output stages
- PNP or NPN open collector
- Interference immunity
- DIN EN 61000-6-2
- Emitted interference
- DIN EN 61000-6-4
- Programming interface
- RS232
- Programmable parameters
- Steps per revolution
- Number of revolutions
- Code
- 2 presets (limits)
- Rotation speed monitoring
- Diagnostic function
- Self-diagnosis
- Code continuity check
- Multiturn sensing
- Approval
- UL approval / E63076
Technical data - mechanical design
- Size (flange)
- ø58 mm
- Shaft type
- ø10 mm solid shaft (clamping flange)
- ø6 mm solid shaft (synchro flange)
- Flange
- Clamping or synchro flange
- Protection DIN EN 60529
- IP 54 (without shaft seal)
- IP 65 (with shaft seal)
- Operating speed
- ≤10000 rpm (mechanical)
- ≤6000 rpm (electric)
- Starting torque
- ≤0,015 Nm (+25 °C, IP 54)
- ≤0,03 Nm (+25 °C, IP 65)
- Rotor moment of inertia
- 20 gcm²
- Admitted shaft load
- ≤20 N axial
- ≤40 N radial
- Material
- Housing: steel
- Flange: aluminium
- Operating temperature
- -25...+70 °C
- Relative humidity
- 95 % non-condensing
- Resistance
- DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz
- DIN EN 60068-2-27 Shock 200 g, 6 ms
- Weight approx.
- 600 g
- Connection
- Cable 1 m, connector D‑SUB, 37‑pin
Baumer_Encoders_UL-E63076_EN_COC_81223928.pdf
Baumer_GXP1W_1xx41xx_CAD.zip
Baumer_GXP1W_DS_EN.pdf
Baumer_GXP1W_II_DE_EN_81005045.pdf
Baumer_GXx1x_Parallel_DE-EN-FR_CoC_81208001.pdf
Baumer_ProGeber_V1-40_MA_EN.pdf
Baumer_GXP1W_1xx41xx_CAD.zip
Baumer_GXP1W_DS_EN.pdf
Baumer_GXP1W_II_DE_EN_81005045.pdf
Baumer_GXx1x_Parallel_DE-EN-FR_CoC_81208001.pdf
Baumer_ProGeber_V1-40_MA_EN.pdf
Наш менеджер свяжется с вами в ближайшее время