Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на zakaz@lanfor.ru
Absolute encodersSolid shaft with synchro flange
- Encoder single- or multiturn / Analog
- ISO 13849 compliant firmware
- E1 compliant design
- High protection up to IP 67
- High resistance to shock and vibrations
- Protection against corrosion C5-M
- Wire cross section 0.5 mm²
- Teach input for adjustment of measuring range
Technical data - electrical ratings
- Voltage supply
- 8...30 VDC
- 14...30 VDC
- Reverse polarity protection
- Yes
- Consumption typ.
- 20 mA (24 VDC, w/o load)
- Initializing time
- ≤170 ms after power on
- Response time
- < 1 ms
- Interface
- Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit
- Function
- Multiturn
- Singleturn
- Teach range
- 5°...359.9° (singleturn)
- 5°...32767 turns (multiturn)
- Absolute accuracy
- ±0,15 ° (+20 ±15 °C)
- ±0,25 ° (-40...+85 °C) sensor
- Accuracy analog output
- ±0.5 % of whole measuring range (-40...+85 °C)
- Sensing method
- Magnetic
- Interference immunity
- DIN EN 61000-6-2
- ISO 11452-2:2004* / -5:2002*
- ISO 7637-2:2004*
- ISO 10605:2008 + Amd 1:2014 (CD ±8 kV / AD ±15 kV)
- * Severity level according to ECE R10 (Rev. 4)
- Emitted interference
- DIN EN 61000-6-4 CISPR 25:2008 (30..1000 MHz)
- ISO 7637-2:2004*
- * Severity level according to ECE R10 (Rev. 4)
- Programmable parameters
- Measuring range teachable
- Diagnostic function
- DATAVALID
- Factory setting
- 360° and 10 revolutions (other on request)
Technical data - mechanical design
- Size (flange)
- ø36 mm
- Shaft type
- ø10 x 16 mm, solid shaft with flat
- Flange
- Synchro flange
- Protection DIN EN 60529
- IP 67 (with shaft seal)
- Operating speed
- ≤6000 rpm
- Starting torque
- ≤2,5 Ncm (+20 °C, IP 67)
- Moment of inertia
- 15,38 gcm²
- Admitted shaft load
- ≤40 N axial
- ≤80 N radial
- Material
- Housing: steel, powder-coated
- Flange: aluminium
- Shaft: stainless steel
- Corrosion protection
- IEC 60068-2-52 Salt mist
- for ambient conditions CX (C5-M) according to ISO 12944-2
- Operating temperature
- -40...+85 °C (see general information)
- Relative humidity
- 95 %
- Resistance
- DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz
- DIN EN 60068-2-27 Shock 500 g, 1 ms
- Weight approx.
- 170 g
- Connection
- Flange connector M12, 5-pin
- Cable 2 m
- Instruction
- Use in safety functions exclusively based on Application Note and MTTFd reliability prediction (request separately).
Baumer_EAM360-SWA_7Lxx_xxxxx_A-stp_CAD.zip
Baumer_EAM360R_Analog_II_A4_DE_EN_FR_IT_ES_81237054.pdf
Baumer_EAM360R_solid_shaft_analog_DS_EN.pdf
Baumer_EAM360_DE-EN-FR_CoC_81240036.pdf
Baumer_EAM580_EAM360_BR_EN_1806_11202518_LRes.pdf
Baumer_EAM360R_Analog_II_A4_DE_EN_FR_IT_ES_81237054.pdf
Baumer_EAM360R_solid_shaft_analog_DS_EN.pdf
Baumer_EAM360_DE-EN-FR_CoC_81240036.pdf
Baumer_EAM580_EAM360_BR_EN_1806_11202518_LRes.pdf
Наш менеджер свяжется с вами в ближайшее время