Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на zakaz@lanfor.ru
Absolute encodersEx approval Ex II 2D/2G (ATEX)
- Encoder multiturn / SSI / ATEX
- Optical sensing method
- Resolution: multiturn 13 + 12 bit
- Clamping flange with solid shaft ø10 mm
- Explosion protection per Ex II 2D/2G (ATEX)
- Device class 2 / zone 1 (gas), zone 21 (dust)
- Electronic setting of zero point
- Counting direction input
- Maximum resistant against magnetic fields
Technical data - electrical ratings
- Voltage supply
- 10...30 VDC
- 5 VDC ±10 %
- Reverse polarity protection
- Yes
- Consumption w/o load
- ≤50 mA (24 VDC)
- Initializing time typ.
- 20 ms after power on
- Interface
- SSI
- Function
- Multiturn
- Steps per revolution
- 16384 / 14 bit
- Number of revolutions
- 4096 / 12 bit
- Absolute accuracy
- ±0,025 °
- Sensing method
- Optical
- Code
- Gray or binary
- Code sequence
- CW/CCW coded by connection
- Inputs
- SSI clock
- Control signals UP/DOWN inv. and zero
- Output stages
- SSI data: Linedriver RS422
- Diagnostic outputs push-pull
- Interference immunity
- DIN EN 61000-6-2
- Emitted interference
- DIN EN 61000-6-4
- Diagnostic function
- Self-diagnosis
- Multiturn sensing
Technical data - mechanical design
- Size (flange)
- ø70 mm
- Shaft type
- ø10 mm solid shaft (clamping flange)
- Flange
- Clamping flange
- Protection DIN EN 60529
- IP 67
- Operating speed
- ≤6000 rpm (mechanical)
- ≤6000 rpm (electric)
- Starting acceleration
- ≤1000 U/s²
- Starting torque
- ≤0,4 Nm (+25 °C)
- Admitted shaft load
- ≤60 N axial
- ≤50 N radial
- Material
- Housing: stainless steel
- Flange: stainless steel
- Operating temperature
- -20...+70 °C
- Relative humidity
- 95 % non-condensing
- Resistance
- DIN EN 60068-2-6 Vibration ±0.75 mm - 10-58 Hz 10 g - 58-2000 Hz
- DIN EN 60068-2-27 Shock 200 g, 6 ms
- Explosion protection
- Ex II 2G Ex d IIC T6
- Ex II 2D
- Weight approx.
- 1300 g
- Connection
- Cable
Наш менеджер свяжется с вами в ближайшее время