Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на zakaz@lanfor.ru
Incremental encodersThrough hollow shaft ø30 to ø50 mm
- Robust encoder in size ø120 mm
- Precise optical sensing
- Universal voltage supply 4.75…30 VDC
- Output signal level TTL or HTL
- Through hollow shaft ø30…50 mm
- Pulses per revolution up to 10 000
- B-side clamping
- Stainless steel design (1.4305)
Technical data - electrical ratings
- Voltage supply
- 8...30 VDC
- 4.75...30 VDC
- Reverse polarity protection
- Yes
- Consumption w/o load
- ≤100 mA
- Pulses per revolution
- 1024 … 10000
- Reference signal
- Zero pulse, width 90°
- Sensing method
- Optical
- Output frequency
- ≤300 kHz (UB = 5 VDC, at 4.75...30 VDC)
- ≤160 kHz (UB > 5 VDC, at 4.75...30 VDC)
- ≤300 kHz (at 8...30 VDC)
- Output signals
- A, B, N + inverted
- Output stages
- Push-pull short-circuit proof
- Interference immunity
- DIN EN 61000-6-2
- Emitted interference
- DIN EN 61000-6-3
- Approval
- UL 508 / CSA 22.2
Technical data - mechanical design
- Size (flange)
- ø120 mm
- Shaft type
- ø30...50 mm (through hollow shaft)
- Mounting kit
- 051
- 058
- Protection DIN EN 60529
- IP 54
- Operating speed
- ≤4000 rpm
- Starting torque
- ≤0,12 Nm (+20 °C)
- Material
- Housing: stainless steel
- Shaft: stainless steel
- Operating temperature
- -20...+70 °C
- Relative humidity
- 90 % non-condensing
- Resistance
- DIN EN 60068-2-6 Vibration 10 g, 55-2000 Hz
- DIN EN 60068-2-27 Shock 30 g, 11 ms
- Connection
- Cable 1 m
- Connector M23 type 2, 12-pin
- Weight approx.
- 2000 g
Наш менеджер свяжется с вами в ближайшее время