Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на zakaz@lanfor.ru
Incremental encodersSolid shaft with square flange
- Size ø58 mm
- Precise optical sensing (interpolated)
- Output signal level programmable (TTL or HTL)
- Square flange 2.5" (63.5 mm)
- Connection axial, radial or tangential
- Pulses per revolution 1...65536, programmable
- High protection up to IP 67
- High resistance to shock and vibrations
Technical data - electrical ratings
- Voltage supply
- 4.75...30 VDC
- Reverse polarity protection
- Yes
- Short-circuit proof
- Yes
- Consumption w/o load
- ≤70 mA
- Initializing time
- ≤30 ms after power on
- Pulses per revolution
- 1 … 65536
- Duty cycle
- 45…55 % typical at 1024, 2048 ppr (further see table Duty cycle)
- Reference signal
- Zero pulse 90° or 180°
- Sensing method
- Optical
- Output frequency
- ≤300 kHz (TTL)
- ≤160 kHz (HTL)
- Output signals
- A+, B+, R+, A-, B-, R-
- Output stages
- TTL/RS422
- HTL/push-pull
- Programmable parameters
- Output level TTL/HTL
- Pulse number 1...65536
- Zero pulse width 90°/180°
- Zero pulse position
- Signal sequence
- Interference immunity
- DIN EN 61000-6-2
- Emitted interference
- DIN EN 61000-6-3
- Approval
- UL 508 / CSA 22.2
Technical data - mechanical design
- Size (flange)
- 2.5 x 2.5" (63.5 x 63.5 mm)
- Shaft type
- ø10 x 20 mm, solid shaft with flat
- ø3/8" x 4/5" (ø9.525 x 20.32 mm), solid shaft with flat
- Admitted shaft load
- ≤40 N axial
- ≤80 N radial
- Flange
- Square flange 2.5" (63.5 mm)
- Protection DIN EN 60529
- IP 65 (without shaft seal)
- IP 67 (with shaft seal)
- Operating speed
- ≤6000 rpm (+20 °C, IP 67)
- ≤12000 rpm (+20 °C, IP 65)
- Starting torque
- ≤0,015 Nm (+20 °C, IP 65)
- ≤0,02 Nm (+20 °C, IP 67)
- Material
- Housing: aluminium die-cast
- Flange: aluminium
- Solid shaft: stainless steel
- Operating temperature
- -40...+100 °C
- Relative humidity
- 90 % non-condensing
- Resistance
- DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz
- DIN EN 60068-2-27 Shock 300 g, 6 ms
- Connection
- Flange connector M12, 8-pin
- Flange connector M23, 12-pin
- Cable
- Weight approx.
- 370 g
Baumer_BTDE-Certificate-of-Compliance_CA_1204.pdf
Baumer_EIL580-SQ10_5Tx_xxxxx_A-stp_CAD.zip
Baumer_EIL580-SQ10_II_DE-EN-FR-IT-ES_1706_11143168_web.pdf
Baumer_EIL580P_BR_EN_1807_11202890_LRes.pdf
Baumer_EIL580P_Square_flange_DS_EN.pdf
Baumer_Encoder-Software-V33-16-07-05_SW_EN_1607.zip
Baumer_Encoders_DE-EN-FR_CoC_81189267.pdf
Baumer_EIL580-SQ10_5Tx_xxxxx_A-stp_CAD.zip
Baumer_EIL580-SQ10_II_DE-EN-FR-IT-ES_1706_11143168_web.pdf
Baumer_EIL580P_BR_EN_1807_11202890_LRes.pdf
Baumer_EIL580P_Square_flange_DS_EN.pdf
Baumer_Encoder-Software-V33-16-07-05_SW_EN_1607.zip
Baumer_Encoders_DE-EN-FR_CoC_81189267.pdf
Наш менеджер свяжется с вами в ближайшее время