Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на zakaz@lanfor.ru
Through hollow shaft up to ø14 mm, automated format adjustment
- Automated format adjustment
- Two keys for format adjustment touch by touch
- Through hollow shaft up to ø14 mm
- Resolution: 1440 steps/revolution ±4096 revolutions
- Display: LCD backlit, two lines
- Absolute multiturn measuring system
- Actual value and target display
- Interface RS485
Technical data - electrical ratings
- Voltage supply
- 24 VDC ±10 %
- Current consumption
- ≤40 mA
- Display
- LCD, 7-segment display, 2-lines, backlit
- Measuring principle
- Absolute multiturn measuring system
- Measuring range
- -99.99...+999.99 mm -9.999...+99.999 inch
- Steps per revolution
- 1440
- Number of revolutions
- 4096 / 12 bit
- Spindle pitch
- ≤14 mm
- Interface
- RS485 (ASCII protocol)
- Data memory
- Parameter buffer: EEPROM Current value buffer: >10 years by integrated 3 V lithium battery
- Programmable parameters
- Display position horizontal/vertical
- Measuring unit mm/inch
- Counting direction
- Spindle pitch
- Spindle tolerance
- Positioning direction
- Direction arrows
- Tolerance window
- Round up/down
- Motive positioning
- 2x softkeys for format alignment
- Direct motor connection to N 152 by motor cable
- Standard DIN EN 61010‑1
- Protection class II
- Overvoltage category II
- Pollution degree 2
- Emitted interference
- DIN EN 61000-6-3
- Interference immunity
- DIN EN 61000-6-2
- Approval
- UL approval / E63076
Technical data - mechanical design
- Shaft type
- ø14 mm (through hollow shaft)
- Operating speed
- ≤600 rpm (short-term)
- Protection DIN EN 60529
- IP 50
- Operating temperature
- -10...+50 °C
- Storage temperature
- -20...+70 °C
- Relative humidity
- 80 % non-condensing
- Torque support
- Torque pin provided at housing
- Connection
- - Cable output (15 cm) with male connector M8, 4-pin
- - Motor cable with female connector M16, 12-pin
- Operation / keypad
- Membrane with two keys
- Housing type
- Surface-mount with hollow shaft
- Dimensions
- 37 x 75 x 45 mm
- Mounting type
- Directly at shaft end by means of grub screw
- Weight approx.
- 120 g
- Material
- Polyamide black, UL 94V-0
Baumer_N+15x_DE-EN-FR_CoC_81205010.pdf
Baumer_N152_DS_EN.pdf
Baumer_N152_II_DE_EN_FR_IT_ES_81005088.pdf
Baumer_N152_Schnittstelle_V1-10_OI_EN_81076022.pdf
Baumer_UL-E63076_EN_COC_81238089.pdf
Baumer_N152_DS_EN.pdf
Baumer_N152_II_DE_EN_FR_IT_ES_81005088.pdf
Baumer_N152_Schnittstelle_V1-10_OI_EN_81076022.pdf
Baumer_UL-E63076_EN_COC_81238089.pdf
Наш менеджер свяжется с вами в ближайшее время