Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на zakaz@lanfor.ru
Encoders without bearings - incrementalSensor head with split wheel and magnetic tape for shaft ø90...300 mm
- Encoder without bearings - incremental with magnetic sensing
- Split wheel design for easiest mounting on installed shafts
- Very large axial tolerances ±8 mm
- Max. 131072 pulses per revolution
- Status indication via system OK output and LED
- Robust and wearless
- Fully encapsulated electronics IP 67
Technical data - electrical ratings
- Voltage supply
- 4.75...30 VDC
- Consumption w/o load
- ≤300 mA (24 VDC)
- Initializing time
- ≤1000 ms after power on
- Output signals
- A+, B+, R+, A-, B-, R-
- Sensing method
- Magnetic
- Status indicator
- Color-LED, system OK output
- Interference immunity
- EN 61000-6-2
- Emitted interference
- EN 61000-6-3
- Approval
- CE
- UL approval / E217823
Technical data - electrical ratings (square-wave)
- Pulses per revolution
- 512 … 131072
- Phase shift
- 90 ° ±2°
- Duty cycle
- 45…55 %
- Reference signal
- Zero pulse, width 90°
- Output frequency
- ≤500 kHz (HTL)
- ≤2 MHz (TTL)
- Output stages
- HTL, TTL/RS422
Technical data - electrical ratings (SinCos)
- Sinewave cycles per revolution
- 512 … 16384
- Phase shift
- 90 ° ±2°
- Reference signal
- Zero pulse, width 360°
- Output frequency
- ≤500 kHz
- Output stages
- SinCos 1 Vpp
Technical data - mechanical design
- Dimensions (sensor head)
- 165 x 25 x 93 mm
- Outer diameter adapter wheel
- 350 mm
- Over all depth adapter wheel
- 40 mm
- Shaft type
- ø90...300 mm (through hollow shaft)
- Axial tolerance
- ±8 mm (belt to head)
- Radial tolerance
- 1…3 mm (belt to head)
- Shaft diameter tolerance
- -0,4…0mm
- Protection DIN EN 60529
- IP 67
- Operating speed
- ≤2000 rpm
- Material
- Housing sensing head: aluminium alloy
- Adapter wheel: stainless steel (1.4104)
- Magnetic belt: stainless steel (1.4104)
- Operating temperature
- -40...+85 °C
- Resistance
- IEC 60068-2-6
- Vibration 30 g, 10-2000 Hz
- IEC 60068-2-27
- Shock 300 g, 6 ms
- Weight approx.
- 880 g (head)
- 13 kg (wheel with belt, bore size ø90 mm)
- 12,5 kg (wheel with belt, bore size ø150 mm)
- 7 kg (wheel with belt, bore size ø299 mm)
- Connection
- Flange connector M23, 12-pin
Наш менеджер свяжется с вами в ближайшее время