Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на zakaz@lanfor.ru
Absolute encodersThrough hollow shaft up to ø14 mm
- Encoder multiturn / parallel
- Optical sensing method
- Resolution: singleturn 12 bit, multiturn 12 bit
- Through hollow shaft ø14 mm
- Resolution, code and preset programmable
- Encoder programming by Windows software
- RS232 encoder programming interface
- Electronic setting to preset
- Cost-efficient mounting
Technical data - electrical ratings
- Voltage supply
- 10...30 VDC
- Reverse polarity protection
- Yes
- Consumption w/o load
- ≤50 mA (24 VDC)
- Initializing time typ.
- 50 ms after power on
- Interface
- 24 parallel outputs
- Function
- Multiturn
- Steps per revolution
- ≤4096 / 12 bit
- Number of revolutions
- ≤4096 / 12 bit
- Absolute accuracy
- ±0,03 °
- Sensing method
- Optical
- Code
- Gray, cut gray, BCD, binary programmable
- Code sequence
- CW/CCW coded by connection
- Inputs
- TxD, RxD (RS232)
- Control signals UP/DOWN inv. and zero
- ENABLE inv.
- STORE inv.
- Output stages
- PNP or NPN open collector
- Interference immunity
- DIN EN 61000-6-2
- Emitted interference
- DIN EN 61000-6-4
- Programming interface
- RS232
- Programmable parameters
- Steps per revolution
- Number of revolutions
- Code
- 2 presets (limits)
- Rotation speed monitoring
- Diagnostic function
- Self-diagnosis
- Code continuity check
- Multiturn sensing
- Approval
- UL approval / E63076
Technical data - mechanical design
- Size (flange)
- ø75 mm
- Shaft type
- ø14 mm (through hollow shaft)
- Protection DIN EN 60529
- IP 54
- Operating speed
- ≤6000 rpm (mechanical)
- ≤6000 rpm (electric)
- Starting torque
- ≤0,05 Nm (+25 °C, IP 54)
- Rotor moment of inertia
- 20 gcm²
- Material
- Housing: steel
- Flange: aluminium
- Operating temperature
- -25...+70 °C
- Relative humidity
- 95 % non-condensing
- Resistance
- DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz
- DIN EN 60068-2-27 Shock 200 g, 6 ms
- Weight approx.
- 700 g
- Connection
- Cable 1 m, connector D‑SUB, 37‑pin
Baumer_Encoders_UL-E63076_EN_COC_81223928.pdf
Baumer_GXP1H_DS_EN.pdf
Baumer_GXP1H_II_DE_EN_81005018.pdf
Baumer_ProGeber_V1-40_MA_EN.pdf
Baumer_GXP1H_DS_EN.pdf
Baumer_GXP1H_II_DE_EN_81005018.pdf
Baumer_ProGeber_V1-40_MA_EN.pdf
Наш менеджер свяжется с вами в ближайшее время