TESF/CC/180 | Ланфор

Бренды по алфавиту:

Eng Рус

Производитель: Schmersal GmbH

Артикул: Л-0045987

Работаем с юридическими лицами, бюджетными организациями, ИП

По вопросам приобретения товара пишите на zakaz@lanfor.ru

Оплата по безналичному расчету согласно выставленному счету

Самовывоз - бесплатно, от 300руб. до пункта выдачи в Вашем городе, доставка от 500руб. "до двери"

Certificates	cULus CCC EAC

Standards	EN 60947-5-1 BG-GS-ET-15
Enclosure material	Zinc die-cast
Material of the contacts, electrical	Silver-nickel alloy 10
Colour of the housing	Black
Gross weight	840 g

Mounting inside	Yes
Additional hinge	Yes
Number of auxiliary contacts	2
Number of safety contacts	2

Standards	EN ISO 13849-1
Mission Time	20 Year(s)

B10d Normally-closed contact (NC)	2,000,000 Operations
B10d Normally open contact (NO)	1,000,000 Operations

Terminal Connector	Spring pulley connection
Cable section, minimum	0.5 mm²
Cable section, maximum	1 mm²
Note (Cable section)	All indications about the cable section are including the conductor ferrules.

Degree of protection	IP65
Ambient temperature, minimum	-25 °C
Ambient temperature, maximum	+65 °C

Rated insulation voltage U_i	250 V
Rated impulse withstand voltage U_imp	2.5 kV

Included in delivery	Additional hinge

Note (General)	Closed guard device = 0° in contact switch travel diagrams. The factory-set switching angle is 3°. Until the limit of the mechanical life has been reached the angle can increase up to 8° under normal wear-out conditions. The positive break angle is 5°.