Контрольное и измерительное оборудование
Оборудование для контроля и учета газов
Автоматизация производственных процессов
Весоизмерительное оборудование
Взрывозащищенное и силовое оборудование
Оборудование для обслуживание холодильных систем
Строительное и дорожное оборудование
Средства индивидуальной защиты
Инструмент
Оборудование и приборы для работы с элегазом (SF6)
Бренд-зона
Импортные электронные компоненты по онлайн каталогам
Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на zakaz@lanfor.ru
- Explosion protection for ATEX Zones 2 and 22
- Thermoplastic enclosure
- Ø M30
- With coding
- Insensitive to transverse misalignment
- Suitable for food processing industry only in combination with BPS 303 SS
- no mechanical wear
Ordering data
| Product type description | EX-BNS 303-12Z-2187-3G/D 5,0M |
| Article number (order number) | 101187774 |
| EAN (European Article Number) | 4030661338477 |
| eCl@ss number, Version 9.0 | 27-27-24-02 |
| eCl@ss number, Version 11.0 | 27-27-24-02 |
| ETIM number, version 6.0 | EC002544 |
| ETIM number, version 7.0 | EC002544 |
Explosion protection
| Explosion protection: regulations | EN 60079-0 EN 60079-15 EN 60079-31 IEC 60947-5-3 |
| Explosion protection zones | 22 2 |
| Explosion protection category | 3D 3G |
| Explosion protection designation | D II 3G Ex nC IIC T6 Gc X D II 3D Ex tc IIIC T80°C Dc X |
Manufacturer declaration | ATEX Zone 2 and 22 |
General data
| Housing construction form | Cylinder, thread |
| Installation conditions (mechanical) | quasi-flush |
| Enclosure material | Glass-fibre, reinforced thermoplastic |
| Material of the nuts | Thermoplastic |
| Gross weight | 226 g |
General data - Features
| Coding | Yes |
| Short circuit detection | Yes |
| Short-circuit recognition | Yes |
| Number of openers | 2 |
| Number of shutters | 1 |
Safety appraisal
| Standards | EN ISO 13849-1 |
| Mission Time | 20 Year(s) |
Safety appraisal - Safety outputs
| B10d- Value Normally-closed contact/Normally open contact (NC/NO) | 25,000,000 Operations |
Mechanical data
| Active area | front side |
| Actuating element | Magnet |
| Impact energy, maximum | 4 J |
| Direction of motion | Head-on to the active surface |
| Tightening torque of nuts, maximum | 3 Nm |
Mechanical data - Switching distances according IEC 60947-5-3
| Ensured switch distance ON Sao | 5 mm |
| Ensured switch distance OFF Sar | 15 mm |
Mechanical data - Connection technique
| Terminal Connector | Cable |
| Length of cable | 5 m |
| Wire cross-section | 0.25 mm2 |
| Wire cross-section | 23 AWG |
| Material of the Cable mantle | PVC |
Mechanical data - Dimensions
| ISO thread of the sensor | M30 |
| width across flats | 36 BK |
| Length of sensor | 44 mm |
Ambient conditions
| Degree of protection | IP67 |
| Ambient temperature, minimum | -25 °C |
| Ambient temperature, maximum | +70 °C |
| Storage and transport temperature, minimum | -25 °C |
| Storage and transport temperature, maximum | +70 °C |
| Resistance to vibrations to EN 60068-2-6 | 10 … 55 Hz, amplitude 1 mm |
| Restistance to shock | 30 g / 11 ms |
Electrical data
| Voltage type | AC (alternating current) DC (direct current) |
| Switching voltage, maximum | 100 VAC |
| Switching voltage, maximum | 100 VDC |
| Switching current, maximum | 0.4 A |
| Switching capacity, maximum | 10 W |
| Switching frequency, maximum | 5 Hz |
Electrical data - Digital Output
| Versions | Miscellaneous, Reed contacts |
Scope of delivery
| Included in delivery | Actuators must be ordered separately. |
| Delivery scope of Mounting material | 2x nuts M30 x 1.5 |
Accessory
| Recommendation (actuator) | BPS 300 BPS 303 BPS 303 SS coded |
| Recommended safety switchgear | SRB-E-301ST SRB-E-201LC |
Notes
| Note (General) | Contact symbols shown for the closed condition of the guard device. The contact configuration for versions with or without LED is identical. |
Наш менеджер свяжется с вами в ближайшее время
