Контрольное и измерительное оборудование
Оборудование для контроля и учета газов
Автоматизация производственных процессов
Весоизмерительное оборудование
Геодезическое оборудование
Взрывозащищенное и силовое оборудование
Оборудование для обслуживание холодильных систем
Лабораторное оборудование
Строительное и дорожное оборудование
Средства индивидуальной защиты
Инструмент
Оборудование и приборы для работы с элегазом (SF6)
Бренд-зона
Импортные электронные компоненты по онлайн каталогам
Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на zakaz@lanfor.ru
- 3 cable entries M 20 x 1.5
- Ex-Zone 22
- Metal enclosure
- Release push button
- Position indicator
- Robust design
- Large wiring compartment
- Twisting of towing eye not possible
- External watertight collar
- wire pull and breakage detection
- one-side operation / wire up to 75 m long
Ordering data
| Product type description | EX-ZQ 900-04-3D |
| Article number (order number) | 101212894 |
| EAN (European Article Number) | 4030661402147 |
| eCl@ss number, Version 9.0 | 27-37-12-01 |
| eCl@ss number, Version 11.0 | 27-37-12-01 |
| ETIM number, version 6.0 | EC002026 |
Explosion protection
| Explosion protection: regulations | EN 60079-31 IEC 60079-0 |
| Explosion protection zones | 22 |
| Explosion protection category | 3D |
| Explosion protection designation | D II 3D Ex tc IIIC T100°C Dc |
Manufacturer declaration | ATEX Zone 22 |
General data
| Standards | IEC/EN 60947-5-1 EN ISO 13850 IEC/EN 60947-5-5 |
| Enclosure material | Zinc die-cast |
| Enclosure coating material | painted |
| Material of the contacts, electrical | Silver |
| Material of the cover | Steel |
| Length of the wire, maximum | 75 m |
| Gross weight | 1,500 g |
General data - Features
| Number of safety contacts | 4 |
Safety appraisal
| Standards | EN ISO 13849-1 |
| Mission Time | 20 Year(s) |
Safety appraisal - Safety outputs
| B10d Normally-closed contact (NC) | 100,000 Operations |
Mechanical data
| Mechanical life, minimum | 1,000,000 Operations |
| Actuating force, maximum | 200 N |
| Actuating travel | 400 mm |
Mechanical data - Connection technique
| Terminal Connector | Screw connection |
| Cable cross-section of the cable glands, minimum | 7 mm |
| Cable cross-section of the cable glands, maximum | 12 mm |
| Cable section, minimum | 0.75 mm² |
| Cable section, maximum | 2.5 mm² |
| Note (Cable section) | All indications about the cable section are including the conductor ferrules. |
Mechanical data - Dimensions
| Length of sensor | 57 mm |
| Width of sensor | 71.5 mm |
| Height of the Sensor, minimum | 221 mm |
| Height of the Sensor, maximum | 237 mm |
Ambient conditions
| Degree of protection | IP67 to EN 60529 |
| Ambient temperature, minimum | -20 °C |
| Ambient temperature, maximum | +55 °C |
| Relative humidity, minimum | 30 % |
| Relative humidity, maximum | 95 % |
Ambient conditions - Insulation value
| Rated insulation voltage Ui | 500 V |
| Rated impulse withstand voltage Uimp | 6 kV |
Electrical data
| Thermal test current | 4 A |
| Utilisation category AC-15 | 230 VAC |
| Utilisation category AC-15 | 4 A |
| Utilisation category DC-13 | 24 VDC |
| Utilisation category DC-13 | 1 A |
| Switching element | NO contact, NC contact |
| Switching principle | Snap switch element |
Scope of delivery
| Included in delivery | Including Ex-certified screwed cable gland and screw plug |
Notes
| Note (General) | For lengths of over 10 m, intermediate wire supports must be installed every 3 to 5 m. Recommended cable lengths for pull-wire Emergency-Stop switches in relation to the range of ambient temperature. As the thimbles are subject to deformation in case of wire pull, the wire should be pulled several times after fitting. After that, the wire must be re-tensioned using the eyebolt or the tensioner. |
Наш менеджер свяжется с вами в ближайшее время
