BDF200-ST1-AS-NHK-LTWH-LTGN-LTWH

Бренды по алфавиту:

Eng Рус

Производитель: Schmersal GmbH

Артикул: Л-0044757

Работаем с юридическими лицами, бюджетными организациями, ИП

По вопросам приобретения товара пишите на zakaz@lanfor.ru

Оплата по безналичному расчету согласно выставленному счету

Самовывоз - бесплатно, от 300руб. до пункта выдачи в Вашем городе, доставка от 500руб. "до двери"

Certificates	TÜV cULus ASi-SaW EAC

Standards	IEC 61508 EN 60947-5-1 EN ISO 13850 EN 62026-2 EN ISO 13849-1
Climatic stress	DIN EN 60068
Enclosure material	Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Gross weight	280 g
Reaction time, maximum	100 ms
Positions used, position 1	Emergency stop, with protective collar
Positions used, position 2	Illuminated pushbutton, white
Positions used, position 3	Illuminated pushbutton, green
Positions used, position 4	Illuminated pushbutton, white

Indicator lamp	No

Standards

IEC 61508

Performance level, up to

Control category to EN13849

PFH-value

1.40 x 10⁻⁸ /h

Note (PFH-value)

up to max. 5,000 switching cycles/year

Safety Integrity Level (SIL), suitable for applications in

Mission Time

20 Year(s)

Mechanical life, Emergency-Stop button	100,000 Operations
Mechanical life, Command devices	1,000,000 Operations

Terminal Connector	Connector plug M12, 4-pole, (A-coding)

Degree of protection	IP65
Ambient temperature, minimum	-25 °C
Ambient temperature, maximum	+65 °C
Storage and transport temperature, minimum	-25 °C
Storage and transport temperature, maximum	+85 °C
Resistance to vibrations to EN 60068-2-6	10 … 150 Hz, amplitude 0.35 mm / 5 g
Restistance to shock	15 g / 11 ms
Protection rating	II

Rated insulation voltage U_i	32 VDC
Rated impulse withstand voltage U_imp	0.8 kV
Overvoltage category	III
Degree of pollution to IEC/EN 60664-1	3

AS-i Operating voltage, minimum	18 VDC
AS-i Operating voltage AS-i maximum	31.6 VDC
Note (AS-i Operating voltage)	Protection against polarity reversal
AS-i Current consumption, maximum	150 mA

Note (AS-i Parameter bits)	Set the parameter outputs to '1111' (0xF) FID: periphery error
AS-i Version (Safety-Slave)	V 3.0
AS-i Profile (Safety-Slave)	S-7.B.F.F
AS-i Input, Channel 1 (Safety-Slave)	Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2 (Safety-Slave)	Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Output, DO 0 (Safety-Slave)	Indicator lamp G24 red
AS-i Output, DO 1 (Safety-Slave)	Indicator lamp G24 green
AS-i Output, DO 2 (Safety-Slave)	No Function
AS-i Output, DO 3 (Safety-Slave)	No Function
AS-i AS-i Parameter bits (Safety-Slave), P0 ... P3	No function
AS-i Version (A/B Slave)	V 3.0
AS-i Profile (A/B Slave)	S-7.A.7.F
AS-i Input, DI 0 (A/B Slave)	Command device Position 4
AS-i Input, DI 1 (A/B Slave)	Command device Position 3
AS-i Input, DI 2 (A/B Slave)	Command device Position 2
AS-i Input, DI 3 (A/B Slave)	Command device Position 2
AS-i Output, DO 0 (A/B Slave)	Illuminated signal position 4
AS-i Output, DO 2 (A/B Slave)	Illuminated signal position 2
AS-i Output, DO 1 (A/B Slave)	Illuminated signal position 3
AS-i Output, DO 3 (A/B Slave)	No Function
AS-i AS-i Parameter bits (A/B Slave), P0 ... P3	No function
AS-i Input module address	0
Note (AS-i Input module address)	Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Note	Both AS-i slaves can be enabled and disabled through the integrated DIP switch. The addressing must take place via the M12 connector.