- 2 Contacts
- 3-phase actuation with pressure point
- Also available as safety foot switch
- Low operating height of pedal
- Cable entry M 20 x 1.5
- High level of stability
- Metal enclosure
- single-pedal types
Ordering data
Product type description | TF 232-20HD |
Article number (order number) | 151182009 |
EAN (European Article Number) | 4030661529066 |
eCl@ss number, Version 9.0 | 27-37-12-18 |
eCl@ss number, Version 11.0 | 27-37-12-18 |
ETIM number, version 6.0 | EC001258 |
Approval - Standards
Certificates | cULus CCC EAC |
General data
Standards | BG-GS-ET-15 DIN VDE 0660-200 EN 60947-5-1 |
Enclosure material | Aluminium |
Enclosure coating material | powder-coated |
Material of the cover | Aluminium |
Material of the pedal | Glass-fibre, reinforced thermoplastic |
Material of the protective shield | Aluminium |
Colour of the housing | RAL 9006 (White aluminum) |
General data - Features
Staggered contacts | Yes |
Probing possible | Yes |
Number of shutters | 2 |
Mechanical data
Mechanical life, minimum | 1,000,000 Operations |
Mechanical data - Connection technique
Terminal Connector | Screw connection |
Cable section, maximum | 1 x 2.5 mm² |
Note (Cable section) | All indications about the cable section are including the conductor ferrules. |
Mechanical data - Dimensions
Width | 170 mm |
Height | 189 mm |
Depth | 274 mm |
Ambient conditions
Degree of protection | IP65 to EN 60529 |
Ambient temperature, minimum | -25 °C |
Ambient temperature, maximum | +70 °C |
Ambient conditions - Insulation value
Rated insulation voltage Ui | 500 V |
Rated impulse withstand voltage Uimp | 6 kV |
Electrical data
Thermal test current | 10 A |
Utilisation category AC-15 | 230 VAC |
Utilisation category AC-15 | 4 A |
Utilisation category DC-13 | 24 VDC |
Utilisation category DC-13 | 1 A |
Switching element | Normally open contact (NO) |
Switching principle | Slow action |
Notes
Note (General) | The pressure point can only be ordered for 2 NO or 4 NO contacts per pedal and is only available with slow action (T). For each contact specification, the pressure point must be specified individually., e.g. TFH 232-11hd or T2FH 232-11hd/11hd |