BNS-Y-02 | Ланфор

Бренды по алфавиту:

Eng Рус

Производитель: Schmersal GmbH

Артикул: Л-0043361

Код производителя: 101194060

Работаем с юридическими лицами, бюджетными организациями, ИП

По вопросам приобретения товара пишите на zakaz@lanfor.ru

Оплата по безналичному расчету согласно выставленному счету

Самовывоз - бесплатно, от 300 ₽ до пункта выдачи в Вашем городе, доставка от 500 ₽ "до двери"

enables the interconnection and the connection of BNS safety sensors to a common safety monitoring module
for BNS 33, BNS 36, BNS 260 (with 2 NC)

Versions	Y-adapter
Connector (electric)	2 x Female connector, 4-pole 1 x Male connector, 4-pole
Gross weight	23 g

Mechanical life, minimum	100 Cycles

Degree of protection	IP67
Ambient temperature, minimum	-25 °C
Ambient temperature, maximum	+70 °C

Recommendation (product combination)	BNS 33 BNS 36 BNS 260

Note (General)	The adapter BNS-Y-02 is intended for safety sensors BNS with two normally closed contacts. With the BNS-Y-02, a series circuit is set up where the two normally closed contacts per sensor are connected in a two-channel series arrangement. Any conventional 4-pole cable with M8 connector can be used as connecting cable. The sensor chain is extended by connecting further Y-adapters in the direction of the arrow. The last safety sensor is connected to the female connector on the extension as the termination. Only safety sensors with the same contact configuration can be connected in series. The types BNS-Y-11 and BNS-Y-02 are not allowed to be connected together in a mixed configuration. The maximum length of the series wiring is 50 m.