- 1 Cable entry PG9 x 1.5
- Metal enclosure
- DC 3-wire
- Wiring compartment
- Long design
- Design M30
Ordering data
| Note (Delivery capacity) | Not available! | 
| Product type description | IFL 10-30L-10/01N | 
| Article number (order number) | 101127019 | 
| EAN (European Article Number) | 4030661278254 | 
| eCl@ss number, Version 9.0 | 27-27-01-01 | 
| eCl@ss number, Version 11.0 | 27-27-01-01 | 
| ETIM number, version 6.0 | EC002714 | 
| ETIM number, version 7.0 | EC002714 | 
Approval - Standards
| Certificates | CCC | 
General data
| Standards | IEC/EN 60947-5-2 DIN VDE 0660-208 | 
| Housing construction form | Cylinder, thread | 
| Installation conditions (mechanical) | flush | 
| Enclosure material | Brass | 
| Enclosure coating material | nickel-plated | 
| Active area | Plastic | 
| Material of the nuts | Brass | 
| Gross weight | 140 g | 
General data - Features
| Integral System Diagnostics, status | Yes | 
| Number of cable wires | 3 | 
Mechanical data
| Tightening torque of nuts, maximum | 30 Nm | 
Mechanical data - Switching distances according IEC 60947-5-3
| Switch distance | 10 mm | 
Mechanical data - Connection technique
| Terminal Connector | Screw connection | 
| Cable section, maximum | 1 x 1.5 mm² | 
Mechanical data - Dimensions
| ISO thread of the sensor | M30 | 
| width across flats | 36 BK | 
| Length of sensor | 118 mm | 
Ambient conditions
| Degree of protection | IP67 to EN 60529 | 
| Ambient temperature, minimum | -25 °C | 
| Ambient temperature, maximum | +70 °C | 
| Protection rating | 0 | 
Electrical data
| Voltage type | DC (direct current) | 
| Operating voltage, minimum | 10 V | 
| Operating voltage, maximum | 60 V | 
| No-load supply current I0 | 5.5 mA | 
| Operating current | 400 mA | 
| Switching element | NO contact or NC contact | 
| Protection circuit integrated | inductive interference protection Protection against polarity reversal | 
| Switching frequency, approx. | 350 Hz | 
Electrical data - Digital Output
| Voltage drop Ud, maximum | 1.5 V | 
| Current at Voltage drop Ud | 0.4 A | 
| Versions | n-type | 
Status indication
| Note (Integral System Diagnostics, status ) | yellow LED | 
Notes
| Note (General) | Instead of nuts, a mounting clamp can be provided. Programmable by repositioning the plug-in jumper at the terminal screws | 
 
                



 
                                         
                                         
                                         
                                         
                                         
                                         
                                 
                                 
                                 
                                 
                                 
                                
 
                   
                   
                  