- Metal enclosure
- 118 mm x 127 mm x 64 mm ( basic component)
- Actuator heads can be repositioned by 4 x 90°
- 2 cable entries M 20 x 1.5
Ordering data
| Note (Delivery capacity) | Not available! |
| Product type description | TJ 452-02Y |
| Article number (order number) | 101059129 |
| EAN (European Article Number) | 4030661034881 |
Approval - Standards
| Certificates | DNV.GL CCC EAC |
General data
| Standards | EN 60947-5-1 |
| Active principle | mechanical |
| Slide form | Castor |
| Enclosure material | Grey cast iron, galvanised |
| Enclosure coating material | painted |
| Material of the contacts, electrical | Silver |
| Roller material | Plastic |
| Gross weight | 1,947 g |
General data - Features
| Number of openers | 2 |
| Number of shutters | 2 |
Mechanical data
| Actuating element | Offset roller lever |
| Mechanical life, minimum | 10,000,000 Operations |
| Actuating angle, from left of switch axis | 45 ° |
| Actuating angle, from right of switch axis | 30 ° |
| Contact opening | 2 x 6 mm |
| Actuating speed, minimum | 1 mm/min |
| Actuating speed, maximum | 0.5 m/s |
| Note (Actuating speed) | Actuating speed with vertical actuating angle to switch axis |
Mechanical data - Connection technique
| Terminal Connector | Screw connection |
| Cable section, minimum | 1.5 mm² |
| Cable section, maximum | 2.5 mm² |
| Note (Cable section) | All indications about the cable section are including the conductor ferrules. |
| Wire cross-section | 13 AWG |
Mechanical data - Dimensions
| Length of sensor | 64 mm |
| Width of sensor | 118 mm |
| Height of sensor | 207 mm |
| Width of Castor | 9 mm |
| Diameter of Castor | 36 mm |
Ambient conditions
| Degree of protection | IP65 to EN 60529 |
| Ambient temperature, minimum | -30 °C |
| Ambient temperature, maximum | +90 °C |
Ambient conditions - Insulation value
| Rated insulation voltage Ui | 400 V |
| Rated impulse withstand voltage Uimp | 6 kV |
Electrical data
| Thermal test current | 16 A |
| Utilisation category AC-15 | 400 VAC |
| Utilisation category AC-15 | 4 A |
| Switching element | Opener (NC) |
| Note (Switching element) | with double break |
| Switching principle | Creep circuit element |
Notes
| Note (General) | Actuation from the right should be avoided, since this reduces the mechanical life of the position switch. |
