CSS 12-34-V-SD-M-L | Ланфор

Бренды по алфавиту:

Eng Рус

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Стоимость уточняйте у менеджера

Производитель: Schmersal GmbH

Артикул: Л-0043985

Код производителя: 101181062

Запросить цену

Работаем с юридическими лицами, бюджетными организациями, ИП

По вопросам приобретения товара пишите на zakaz@lanfor.ru

Оплата по безналичному расчету согласно выставленному счету

Самовывоз - бесплатно, от 300 ₽ до пункта выдачи в Вашем городе, доставка от 500 ₽ "до двери"

1 x Pre-wired cable 8-pole
Actuation from top
serial diagnostic output
Max. 31 sensors can be wired in series.
Thermoplastic enclosure
Electronic contact-free, coded system
Misaligned actuation possible
27 mm x 108.2 mm x 35 mm
High repeat accuracy of the switching points
Max. length of the sensor chain 200 m
2 short-circuit proof PNP safety outputs
Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet

Ordering data

Note (Delivery capacity)	Not available!
Product type description	CSS 12-34-V-SD-M-L
Article number (order number)	101181062
EAN (European Article Number)	4030661314860
eCl@ss number, Version 9.0	27-27-24-03
eCl@ss number, Version 11.0	27-27-24-03

Approval - Standards

Certificates	TÜV cULus EAC

General data

Standards	IEC 60947-5-3
Active principle	inductive
Housing construction form	Block
Installation conditions (mechanical)	not flush
Sensor topology	Sensor for series wiring
Enclosure material	Glass-fibre, reinforced thermoplastic
Active area	Glass-fibre, reinforced thermoplastic
Gross weight	300 g
Reaction time, maximum	30 ms
Duration of risk, maximum	60 ms

General data - Features

Serial diagnostics	Yes
Diagnostic output	Yes
Short circuit detection	Yes
Short-circuit recognition	Yes
Safety functions	Yes
Cascadable	Yes
Integral System Diagnostics, status	Yes
Number of LEDs	3
Number of semi-conductor outputs with signaling function	1
Number of fail-safe digital outputs	2
Number of Series-wiring of sensors	31

Safety appraisal

Standards

EN ISO 13849-1

IEC 60947-5-3

IEC 61508

Performance level, up to

Control category to EN13849

PFH-value

3.60 x 10⁻⁹ /h

Safety Integrity Level (SIL), suitable for applications in

Mission Time

20 Year(s)

Mechanical data

Actuating panels	Actuation from top
Active area	front side
Actuator switch distance	Actuator CST 34-V-1: 12 mm Actuator CST 34-S-2: 10 mm Actuator CST 34-S-3: 15 mm Actuator CST 180-1 / CST 180-2: 12 mm Actuator CST 34-V-1: 10 mm Actuator CST 34-S-2: 8 mm Actuator CST 34-S-3: 13 mm Actuator CST 180-1 / CST 180-2: 10 mm Actuator CST 34-V-1: 15 mm Actuator CST 34-S-2: 16 mm Actuator CST 34-S-3: 18 mm Actuator CST 180-1 / CST 180-2: 16 mm
Hysteresis (Switch distance), maximum	1.5 mm
Repeat accuracy R R	0.5 mm
Note (Repeat accuracy _R)	Axial offset: the front face allows for an axial misalignment (z) of max. ± 8 mm (see figure: operating principle).

Mechanical data - Switching distances according IEC 60947-5-3

Switch distance	10 mm 12 mm 15 mm
Ensured switch distance ON S_ao	10 mm 13 mm 8 mm
Ensured switch distance OFF S_ar	15 mm 16 mm 18 mm

Mechanical data - Connection technique

Terminal Connector	Cable (Y-UL 2517), 8-pole
Length of cable	2 m
Cable section, maximum	8 x 0.35 mm²
Wire cross-section	22 AWG
Cable type	LiYY
Note	The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current

Mechanical data - Dimensions

Length of sensor	35 mm
Width of sensor	27 mm
Height of sensor	108.2 mm

Ambient conditions

Degree of protection	IP65 to EN 60529 IP67 to EN 60529
Ambient temperature, minimum	-25 °C
Ambient temperature, maximum	+70 °C
Storage and transport temperature, minimum	-25 °C
Storage and transport temperature, maximum	+85 °C
Resistance to vibrations to EN 60068-2-6	10 … 55 Hz, amplitude 1 mm
Restistance to shock	30 g / 11 ms
Protection rating	II

Ambient conditions - Insulation value

Rated insulation voltage U_i	32 VDC
Rated impulse withstand voltage U_imp	0.8 kV
Overvoltage category	III
Degree of pollution to VDE 0100	3

Electrical data

Voltage type	DC (direct current)
No-load supply current I₀	100 mA
Operating current	600 mA
Required rated short-circuit current to EN 60947-5-1	100 A
Utilisation category DC-12	24 VDC
Utilisation category DC-12	0.05 A
Utilisation category DC-13	24 VDC
Utilisation category DC-13	0.05 A
Switching frequency, approx.	3 Hz

Electrical data - Fail-safe digital outputs

Rated operating current (safety outputs)	250 mA
Output current, (fail-safe output), maximum	0.25 A
Versions	p-type
Voltage drop U_d, maximum	0.5 V
Current leakage I_r	0.5 mA
Voltage, Utilisation category DC12	24 VDC
Current, Utilisation category DC12	0.25 A
Voltage, Utilisation category DC13	24 VDC
Current, Utilisation category DC13	0.25 A

Electrical data - Digital Output

Versions	p-type

Electrical data - Diagnostic output

Operating current	50 mA
Versions	p-type
Voltage drop U_d, maximum	5 V

Electrical data - Electromagnetic compatibility (EMC)

Interfering radiation	IEC 61000-6-4
EMC rating	IEC 61000-6-2

Pin assignment

PIN 1	A1 Ue Brown
PIN 2	X1 Safety input 1 White
PIN 3	A2 GND Blue
PIN 4	Y1 Safety output 1 Black
PIN 5	SD serial diagnostic output: Grey
PIN 6	X2 Safety input 2 violet
PIN 7	Y2 Safety output 2 red
PIN 8	IN serial diagnostic input Pink

Scope of delivery

Included in delivery	Actuators must be ordered separately.

Accessory

Recommended safety switchgear	PROTECT PSC1 SRB-E-301ST SRB-E-201LC

Notes

Note (General)	Evaluation requirements: dual-channel safety input, suitable for p-type sensors with NO function. The safety-monitoring module must tolerate internal functional tests of the sensors with cyclic switch-off of the sensor outputs for max. 0.5 ms. Short-circuit recognition by the evaluation is not necessary.

Ваше имя*

Ваш Email

Номер телефона

Город

Введите текст с картинки*