Контрольное и измерительное оборудование
Оборудование для контроля и учета газов
Автоматизация производственных процессов
Весоизмерительное оборудование
Взрывозащищенное и силовое оборудование
Оборудование для обслуживание холодильных систем
Строительное и дорожное оборудование
Средства индивидуальной защиты
Инструмент
Оборудование и приборы для работы с элегазом (SF6)
Бренд-зона
Импортные электронные компоненты по онлайн каталогам
Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на zakaz@lanfor.ru
- LED version
- Explosion protection for ATEX Zones 2 and 22
- Stainless steel enclosure
- 88 mm x 27 mm x 14,5 mm
- Concealed mounting possible
- Insensitive to transverse misalignment
- no mechanical wear
- Suitable for food processing industry
- Cable connection suitable for the food industry
Ordering data
| Product type description | EX-BNS 40S-12ZG |
| Article number (order number) | 103002171 |
| EAN (European Article Number) | 4030661428444 |
| eCl@ss number, Version 9.0 | 27-27-24-02 |
| eCl@ss number, Version 11.0 | 27-27-24-02 |
| ETIM number, version 6.0 | EC002544 |
| ETIM number, version 7.0 | EC002544 |
Explosion protection
| Explosion protection: regulations | EN 60079-15 EN 60079-31 IEC 60079-0 |
| Explosion protection zones | 22 2 |
| Explosion protection category | 3D 3G |
| Explosion protection designation | D II 3G Ex nA nC IIC T6 Gc D II 3D Ex tc IIIC T80°C Dc X |
Manufacturer declaration | ATEX Zone 2 and 22 |
General data
| Standards | IEC 60947-5-3 BG-GS-ET-14 |
| Housing construction form | Block |
| Installation conditions (mechanical) | not flush |
| Enclosure material | Stainless steel (V4A) |
| Gross weight | 200 g |
General data - Features
| Coding | Yes |
| Short circuit detection | Yes |
| Short-circuit recognition | Yes |
| Integral System Diagnostics, status | Yes |
| Prerequisite evaluation unit | Yes |
| Number of openers | 2 |
| Number of shutters | 1 |
Safety appraisal
| Standards | EN ISO 13849-1 |
| Mission Time | 20 Year(s) |
Safety appraisal - Safety outputs
| B10d- Value Normally-closed contact/Normally open contact (NC/NO) | 25,000,000 Operations |
Mechanical data
| Active area | lateral |
| Actuating element | Magnet |
| Impact energy, maximum | 7 J |
| Direction of motion | Head-on to the active surface |
Mechanical data - Switching distances according IEC 60947-5-3
| Ensured switch distance ON Sao | 8 mm |
| Ensured switch distance OFF Sar | 18 mm |
Mechanical data - Connection technique
| Terminal Connector | Cable |
| Length of cable | 1 m |
| Wire cross-section | 0.25 mm2 |
| Wire cross-section | 23 AWG |
| Material of the Cable mantle | LiYY |
Mechanical data - Dimensions
| Length of sensor | 14.5 mm |
| Width of sensor | 88 mm |
| Height of sensor | 27 mm |
Ambient conditions
| Degree of protection | IP65 to EN 60529 IP67 to EN 60529 |
| Ambient temperature, minimum | -20 °C |
| Ambient temperature, maximum | +60 °C |
| Storage and transport temperature, minimum | -25 °C |
| Storage and transport temperature, maximum | +80 °C |
| Resistance to vibrations to EN 60068-2-6 | 10 … 55 Hz, amplitude 1 mm |
| Restistance to shock | 30 g / 11 ms |
Electrical data
| Voltage type | DC (direct current) |
| Required rated short-circuit current to EN 60947-5-1 | 100 A |
| Switching voltage, maximum | 24 VDC |
| Switching current, maximum | 0.01 A |
| Switching capacity, maximum | 0.2 W |
| Switching frequency, maximum | 5 Hz |
Electrical data - Digital Output
| Versions | Miscellaneous, Reed contacts |
Status indication
| Note (Integral System Diagnostics, status ) | The LED is illuminated when the guard is closed. |
Scope of delivery
| Included in delivery | Actuators must be ordered separately. |
Accessory
| Recommendation (actuator) | BPS 40S-2 BPS 40S-1-C BPS 40S-2-C |
| Recommended safety switchgear | SRB-E-301ST SRB-E-201LC |
Notes
| Note (General) | Contact symbols shown for the closed condition of the guard device. The contact configuration for versions with or without LED is identical. |
Circuit example
| Note (Wiring diagram) | Contact S21-S22 must be integrated in the safety circuit. |
Наш менеджер свяжется с вами в ближайшее время
