- 3 Cable entry M 20 x 1.5
- Metal enclosure
- 3 Contacts
- 67 mm x 105 mm x 43 mm ( basic component)
Ordering data
| Product type description | TS 016-03Y-M20 |
| Article number (order number) | 101168064 |
| EAN (European Article Number) | 4030661220420 |
| eCl@ss number, Version 9.0 | 27-27-06-01 |
| eCl@ss number, Version 11.0 | 27-27-06-01 |
| ETIM number, version 6.0 | EC000030 |
| ETIM number, version 7.0 | EC000030 |
Approval - Standards
| Certificates | cULus CCC EAC |
General data
| Standards | EN 60947-5-1 |
| Active principle | mechanical |
| Slide form | Sphere |
| Enclosure material | Light-alloy diecast, paint finish |
| Enclosure coating material | painted |
| Material of the contacts, electrical | Silver |
| Gross weight | 325 g |
General data - Features
| Number of openers | 3 |
Mechanical data
| Actuating element | Plunger |
| Mechanical life, minimum | 5,000,000 Operations |
| Actuating angle | 20 ° |
| Actuating force | 27 N |
| Contact opening | 2 x 2.5 mm |
| Actuating speed, minimum | 1 mm/min |
| Actuating speed, maximum | 1 m/s |
| Note (Actuating speed) | Actuating speed with vertical actuating angle to switch axis |
Mechanical data - Connection technique
| Terminal Connector | Screw connection |
| Cable section, maximum | 2.5 mm² |
| Note (Cable section) | All indications about the cable section are including the conductor ferrules. |
| Wire cross-section | 13 AWG |
Mechanical data - Dimensions
| Length of sensor | 43 mm |
| Width of sensor | 67 mm |
| Height of sensor | 116 mm |
| Diameter of the Plunger | 6 mm |
Ambient conditions
| Degree of protection | IP65 to EN 60529 |
| Ambient temperature, minimum | -30 °C |
| Ambient temperature, maximum | +90 °C |
Ambient conditions - Insulation value
| Rated insulation voltage Ui | 400 V |
Electrical data
| Thermal test current | 10 A |
| Utilisation category AC-15 | 400 VAC |
| Utilisation category AC-15 | 4 A |
| Switching element | Opener (NC) |
| Note (Switching element) | with double break |
| Switching principle | Creep circuit element |
Notes
| Note (General) | Actuation from the side of the plunger should be avoided, since this reduces the mechanical life of the position switch. |
