SRB-E-402FWS-TS | Ланфор

Бренды по алфавиту:

Eng Рус

Производитель: Schmersal GmbH

Артикул: Л-0045639

Код производителя: 103014757

Работаем с юридическими лицами, бюджетными организациями, ИП

По вопросам приобретения товара пишите на zakaz@lanfor.ru

Оплата по безналичному расчету согласно выставленному счету

Самовывоз - бесплатно, от 300 ₽ до пункта выдачи в Вашем городе, доставка от 500 ₽ "до двери"

Certificates	TÜV cULus CCC

Standards	EN ISO 13849-1 EN 60947-5-1 EN 60204-1 EN 60947-5-5 IEC 61508
Climatic stress	EN 60068-2-78
Enclosure material	Glass-fibre reinforced thermoplastic, ventilated
Material of the contacts, electrical	Ag-Ni, self-cleaning, positive drive
Gross weight	190 g

Stop-Category	0
Electronic Fuse	Yes
Wire breakage detection	Yes
Short-circuit recognition	Yes
Start input	Yes
Feedback circuit	Yes
Automatic reset function	Yes
Reset edge detection	Yes
Earth connection detection	Yes
Integral System Diagnostics, status	Yes
Number of auxiliary contacts	1
Number of inputs for NC	4
Number of inputs for NO	2
Number of LEDs	6
Number of safety contacts	2
Number of fail-safe digital outputs	2
Number of signalling outputs	1

Standards	IEC 62061 IEC 61508 EN ISO 13849-1

Performance Level, up to	e
Control category to EN13849	4
Diagnostic Coverage (DC) Level	> 94 %
PFH-value	1.25 x 10⁻⁸ /h
PFD value	5.30 x 10⁻⁵
Safety Integrity Level (SIL), suitable for applications in	3
Mission time	20 Year(s)
Common Cause Failure (CCF), minimum	65

Performance level, up to	e
Control category to EN13849	4
PFH-value	2.66 x 10⁻⁹ /h
PFD value	2.42 x 10⁻⁵
Safety Integrity Level (SIL), suitable for applications in	3
Mission time	20 Year(s)

Mechanical life, minimum	10,000,000 Operations
Mounting	Snaps onto standard DIN rail to EN 60715

Terminal Connector	Screw connection, plug-in rigid or flexible
Terminal designations	IEC 60947-1
Cable section, minimum	0.25 mm²
Cable section, maximum	2.5 mm²
Tightening torque of Clips	0.5 Nm

Degree of protection of the enclosure	IP40
Degree of protection of the mounting space	IP54
Degree of protection of clips or terminals	IP20
Ambient temperature, minimum	-25 °C
Ambient temperature, maximum	+60 °C
Storage and transport temperature, minimum	-40 °C
Storage and transport temperature, maximum	+85 °C
Resistance to vibrations to EN 60068-2-6	10 ... 55 Hz, Amplitude 0.35 mm
Restistance to shock	30 g / 11 ms

Rated insulation voltage U_i	250 V / 50 V
Rated impulse withstand voltage, relay output U_imp	4 kV
Rated impulse withstand voltage, semiconductor output U_imp	0.8 kV
Overvoltage category	III
Degree of pollution to IEC/EN 60664-1	2

Rated operating voltage	24 VDC -20%/+20%, residual ripple max. 10%
Operating current	150 mA
Rated AC voltage for controls at DC minimum	19.2 VDC
Rated control voltage at DC, maximum	28.8 VDC
Electrical power consumption	3 W
Contact resistance, maximum	0.1 Ω
Note (Contact resistance)	in new state
Drop-out delay in case of power failure, typically	10 ms
Drop-out delay in case of emergency, typically	10 ms
Pull-in delay at automatic start, maximum, typically	150 ms
ON delay at automatic start	Adjustable
Pull-in delay at RESET, typically	150 ms
Switching frequency, maximum	0.3 Hz

Voltage drop U_d, maximum	0.5 V
Current leakage I_r	1 mA
Voltage, Utilisation category DC13	24 VDC
Current, Utilisation category DC13	2 A

Voltage, Utilisation category AC15	230 VAC
Current, Utilisation category AC-15	4 A
Voltage, Utilisation category DC13	24 VDC
Current, Utilisation category DC13	4 A
Switching capacity, minimum	10 VDC
Switching capacity, minimum	10 mA
Switching capacity, maximum	250 VAC
Switching capacity, maximum	6 A