SSW301HV-115V | Ланфор

Бренды по алфавиту:

Eng Рус

Производитель: Schmersal GmbH

Артикул: Л-0045640

Код производителя: 101182592

Работаем с юридическими лицами, бюджетными организациями, ИП

По вопросам приобретения товара пишите на zakaz@lanfor.ru

Оплата по безналичному расчету согласно выставленному счету

Самовывоз - бесплатно, от 300 ₽ до пункта выдачи в Вашем городе, доставка от 500 ₽ "до двери"

Fail-safe standstill monitors
This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
3 safety contacts, STOP 0
Control category 4 to ISO 13849-1

Certificates	cULus CCC EAC

Standards	IEC 61508 IEC/EN 60204-1 EN 60947-5-1 EN ISO 13849-1
Climatic stress	EN 60068-2-78
Enclosure material	Glass-fibre, reinforced thermoplastic
Material of the contacts, electrical	AgSn0 + Au, self-cleaning, positive drive
Gross weight	500 g

Stop-Category	0
Wire breakage detection	Yes
Short-circuit recognition	Yes
Feedback circuit	Yes
Automatic reset function	Yes
Earth connection detection	Yes
Integral System Diagnostics, status	Yes
Number of auxiliary contacts	1
Number of LEDs	5
Number of safety contacts	3

Standards	EN ISO 13849-1 IEC 61508
Mission Time	20 Year(s)
Common Cause Failure (CCF), minimum	65

Performance level, stop 0, up to	e
Category, Stop 0	4
Diagnostic Coverage (DC) Level, Stop 0	≥ 99 %
PFH-Value Stop 0	2.00 x 10⁻⁸ /h
Safety Integrity Level (SIL), Stop 0, suitable for applications in	3

Mechanical life, minimum	10,000,000 Operations
Mounting	Snaps onto standard DIN rail to EN 60715

Terminal Connector	Screw connection rigid or flexible
Terminal designations	IEC/EN 60947-1
Cable section, minimum	0.25 mm²
Cable section, maximum	2.5 mm²
Tightening torque of Clips	0.6 Nm

Degree of protection of the enclosure	IP40
Degree of protection of the mounting space	IP54
Degree of protection of clips or terminals	IP20
Ambient temperature, minimum	-25 °C
Ambient temperature, maximum	+45 °C
Storage and transport temperature, minimum	-40 °C
Storage and transport temperature, maximum	+85 °C
Resistance to vibrations to EN 60068-2-6	10 ... 55 Hz, Amplitude 0.35 mm
Restistance to shock	30 g / 11 ms

Rated impulse withstand voltage U_imp	4 kV
Degree of pollution to IEC/EN 60664-1	2

Rated operating voltage	115 VAC -15% / +10%
Rated AC voltage for controls, 50 Hz, minimum	97.8 VAC
Rated control voltage at AC 50 Hz, maximum	126.5 VAC
Rated AC voltage for controls, 60 Hz, minimum	97.8 VAC
Rated control voltage at AC 60 Hz, maximum	126.5 VAC
Electrical power consumption, maximum	4 W
Contact resistance, maximum	0.1 Ω
Note (Contact resistance)	in new state
Drop-out delay in case of emergency stop, maximum	15 ms
Pull-in delay at automatic start (after detecting standstill), approx.	7,000 ms

Voltage, Utilisation category AC15	230 VAC
Current, Utilisation category AC-15	6 A
Voltage, Utilisation category DC13	24 VDC
Current, Utilisation category DC13	6 A
Switching capacity, minimum	10 VDC
Switching capacity, minimum	10 mA
Switching capacity, maximum	250 VAC
Switching capacity, maximum	8 A