PROTECT-PE-02 | Ланфор

Бренды по алфавиту:

Eng Рус

Производитель: Schmersal GmbH

Артикул: Л-0045651

Код производителя: 101210948

Работаем с юридическими лицами, бюджетными организациями, ИП

По вопросам приобретения товара пишите на zakaz@lanfor.ru

Оплата по безналичному расчету согласно выставленному счету

Самовывоз - бесплатно, от 300 ₽ до пункта выдачи в Вашем городе, доставка от 500 ₽ "до двери"

Possibility to connect up to 4 sensors with non-isolated signals, e.g. the CSS products from Schmersal as well as AOPD’s (only PROTECT-PE-02)
Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
Signalling output for each sensor (monitoring of both circuits of the sensors) and and all sensors (Y5, group signal)
2 safety contacts

Certificates	cULus EAC

Standards	IEC 61508 IEC/EN 60204-1 EN 60947-5-1 EN ISO 13849-1
Climatic stress	EN 60068-2-78
Enclosure material	Glass-fibre reinforced thermoplastic, ventilated
Gross weight	180 g

Stop-Category	0
Electronic Fuse	Yes
Wire breakage detection	Yes
Automatic reset function	Yes
Earth connection detection	Yes
Integral System Diagnostics, general	Yes
Number of auxiliary contacts	2 9
Number of LEDs	6
Number of openers	2
Number of signalling outputs	7

Standards	EN 60947-5-1 IEC 61508

Performance Level, up to	d
Control category to EN13849	3
Diagnostic Coverage (DC) Level	60 %
PFH-value	2.00 x 10⁻⁷ /h
Safety Integrity Level (SIL), suitable for applications in	2
Mission time	20 Year(s)
Common Cause Failure (CCF), minimum	65

Mechanical life, minimum	10,000,000 Operations
Mounting	Snaps onto standard DIN rail to EN 60715

Degree of protection of the enclosure	IP20
Degree of protection of the mounting space	IP20
Degree of protection of clips or terminals	IP20
Ambient temperature, minimum	-25 °C
Ambient temperature, maximum	+55 °C
Storage and transport temperature, minimum	-40 °C
Storage and transport temperature, maximum	+85 °C
Resistance to vibrations to EN 60068-2-6	10...55 Hz, Amplitude 0.35 mm, ± 15 %
Restistance to shock	30 g / 11 ms

Rated impulse withstand voltage U_imp	4 kV
Overvoltage category	III
Degree of pollution to VDE 0110	2

Rated operating voltage	24 VDC -15% / +20%, residual ripple max. 10 %
Rated AC voltage for controls, 50 Hz, minimum	21.1 VAC
Rated control voltage at AC 50 Hz, maximum	26.4 VAC
Rated AC voltage for controls, 60 Hz, minimum	21.1 VAC
Rated control voltage at AC 60 Hz, maximum	26.4 VAC
Rated AC voltage for controls at DC minimum	21.1 VDC
Rated control voltage at DC, maximum	28.8 VDC
Electrical power consumption	1.7 W
Input resistance at Ue	2,900 Ω
Contact resistance, maximum	0.1 Ω
Note (Contact resistance)	in new state
Drop-out delay in case of power failure, maximum	60 ms
Drop-out delay in case of emergency stop, maximum	10 ms
Pull-in delay at automatic start, maximum, typically	10 ms

Voltage, Utilisation category DC13	24 VDC
Current, Utilisation category DC13	2 A
Switching capacity, minimum	10 VDC
Switching capacity, minimum	10 mA
Switching capacity, maximum	24 VAC
Switching capacity, maximum	2 A