ASIM-C-M12-4P-0,5M | Ланфор

Бренды по алфавиту:

Eng Рус

Производитель: Schmersal GmbH

Артикул: Л-0044766

Работаем с юридическими лицами, бюджетными организациями, ИП

По вопросам приобретения товара пишите на zakaz@lanfor.ru

Оплата по безналичному расчету согласно выставленному счету

Самовывоз - бесплатно, от 300руб. до пункта выдачи в Вашем городе, доставка от 500руб. "до двери"

Certificates	TÜV cULus

Safety functions	Yes
Integral System Diagnostics, status	Yes

Standards

EN 62061

Performance level, up to

Control category to EN13849

Safety Integrity Level (SIL), suitable for applications in

Mission Time

20 Year(s)

Degree of protection	IP67 to EN 60529
Ambient temperature, minimum	-20 °C
Ambient temperature, maximum	+60 °C
Storage and transport temperature, minimum	-25 °C
Storage and transport temperature, maximum	+80 °C
Relative humidity, minimum	30 %
Relative humidity, maximum	95 %
Note (Relative humidity)	non-condensing non-icing
Resistance to vibrations to EN 60068-2-6	10 … 57 Hz, amplitude 0.75 mm
Restistance to shock	30 g / 11 ms
Protection rating	III

Rated insulation voltage U_i	32 VDC
Rated impulse withstand voltage U_imp	0.8 kV
Overvoltage category	III
Degree of pollution to VDE 0100	3

AS-i Operating voltage, minimum	26.5 VDC
AS-i Operating voltage AS-i maximum	31.6 VDC
Note (AS-i Operating voltage)	Protection against polarity reversal
AS-i Current consumption, maximum	90 mA

AS-i Version	V 3.0
AS-i Profile	S-0.B.F.0
AS-i Input, Channel 1	Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2	Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Outputs, DO 0	No Function
AS-i Outputs, DO 1 … DO 3	No Function
AS-i Parameter bits, P0	Communication monitoring AS-i
AS-i Parameter bits, P1 ... P3	No function
Note (AS-i Parameter bits)	Set the parameter outputs to '1111' (0xF)
AS-i Input module address	0
Note (AS-i Input module address)	Preset to address 0, can be changed through AS-interface bus master or hand-held programming device

Note (LED switching conditions display)	(1) green LED (AS-i LED): AS-i supply voltage / Slave address = 0 (2) red LED: AS-i communication error / Slave address = 0 (3) yellow LED: I1 = Status safety input 1 (4) yellow LED: I2 = Status safety input 2 (5) LED yellow: -