BWU3565 | Ланфор

Бренды по алфавиту:

Eng Рус

Производитель: Schmersal GmbH

Артикул: Л-0044763

Работаем с юридическими лицами, бюджетными организациями, ИП

По вопросам приобретения товара пишите на zakaz@lanfor.ru

Оплата по безналичному расчету согласно выставленному счету

Самовывоз - бесплатно, от 300руб. до пункта выдачи в Вашем городе, доставка от 500руб. "до двери"

Safety functions	Yes
Integral System Diagnostics, status	Yes

Standards

EN 62061

Performance level, up to

Control category to EN13849

PFH-value

5.18 x 10⁻⁹ /h

PFD value

6.19 x 10⁻⁷

Safety Integrity Level (SIL), suitable for applications in

Mission Time

20 Year(s)

Terminal Connector	Cable connector M12, 8-pole, A-coded
Length of cable	1 m
Material of the cable	PUR

Degree of protection	IP67
Ambient temperature, minimum	-20 °C
Ambient temperature, maximum	+60 °C
Storage and transport temperature, minimum	-30 °C
Storage and transport temperature, maximum	+85 °C
Resistance to vibrations to EN 60068-2-6	10 … 55 Hz, amplitude 0.5 mm
Restistance to shock	15 g / 11 ms

AS-i Operating voltage, minimum	21.6 VDC
AS-i Operating voltage AS-i maximum	31.6 VDC
AS-i Current consumption, maximum	60 mA

AS-i Specification	Safety-Slave
AS-i Version	V 2.1
AS-i Profile	S-7.B.F.1
AS-i Input, Channel 1	Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2	Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Outputs, DO 0	Digital output, Motor control system
AS-i Outputs, DO 1 … DO 3	No Function
AS-i Parameter bits, P0	Control system watchdog
AS-i Parameter bits, P1	Diagnostics signal safety switchgear (inverted)
AS-i Parameter bits, P2 ... P3	No function
Note (AS-i Parameter bits)	Set the parameter outputs to '1111' (0xF)
AS-i Input module address	0
Note (AS-i Input module address)	Preset to address 0, can be changed through AS-interface bus master or hand-held programming device

Rated operating voltage	24 VDC -15% / +10% (stabilised PELV)

Note (LED switching conditions display)	(1) green/red LED (AS-i duo LED): Supply voltage / communication error / slave address = 0 / periphery error detected (2) LED green: AUX-Power available (3) LED yellow: S1 = Status safety input 1 (4) LED yellow: S2 = Status safety input 2 (5) LED yellow: I1 = Status input I1 (6) LED yellow: o1 = Status output o1