Работаем с юридическими лицами, бюджетными организациями, ИП
            
        
                
                По вопросам приобретения товара пишите на zakaz@lanfor.ru
            
        
                Cable transducer - absoluteInterface CANopen® or CANopen® redundant 
                - Interface CANopen® or CANopen® redundant
- Potentiometer sensing measuring method
- Operating temperature -40...+85 °C
- Protection IP 65
- Flange connector M12 or cable
- Removable stickers for drainage
- Isolation voltage 3 kV
Technical data - electrical ratings
- Voltage supply
- 10...30 VDC
 
- Consumption typ.
- 25 mA (24 VDC, w/o load)
 
- Initializing time typ.
- 500 ms after power on
 
- Interface
- CANopen®
 
- Function
- Linear position feedback
 
- Profile conformity
- CANopen® CiA DS 301, DS 406, DS 410
 
- Measuring range
- Up to 12 m (linear position)
- 360° (inclination angle)
 
- Resolution
- 0,1 mm (linear position)
- 0,1 ° (inclination angle)
 
- Temperature coefficient
- 0,02 °/K (inclination angle)
 
- Linearity
- ±0.3 % FS (linear position)
- ±0.5 % FS (inclination angle)
 
- Absolute accuracy
- ±0,3 % FS (linear position)
- ±% FS (inclination angle)
- ±0,2 ° (+25 °C / inclination angle)
 
- Sensing method
- Potentiometer
 
- Code sequence
- Programmable
 
- Interference immunity
- DIN EN 61000-6-2
 
- Emitted interference
- DIN EN 61000-6-3
 
- Programmable parameters
- Operating modes
- Rotating direction
- Scaling
- Zero position
 
Technical data - mechanical design
- Protection DIN EN 60529
- IP 65 (housing, drainage holes closed)
- IP 54 (cable inlet)
 
- Material
- Cable: Stainless steel cable AISI 316 coated with nylon PA12
- Housing: plastic
 
- Operating temperature
- -40...+85 °C
 
- Measuring length
- 12 m
 
- Cable diameter
- 0,7 mm
 
- Cable fastening
- Eyelet Height: 5 mm Internal diameter: 5 mm Outer diameter: 10 mm
 
- Pull-in force
- >2,5 N (pull-in force reduced at low temperatures)
 
- Pull-out force
- ≤8 N
 
- Relative humidity
- 95 % non-condensing
 
- Resistance
- DIN EN 60068-2-6 Vibration 20 g, 10-2000 Hz
- DIN EN 60068-2-27 Shock 50 g, 11 ms
 
- Weight approx.
- 1630 g
 
- Connection
- Flange connector M12, 5-pin
- Cable 2 m, radial
 
- Instruction
- Please consider the assembly instructions
 
                        
                        Baumer_GCA12-PPxxx_RCN_xx0_A_xxx_stp_CAD.zip
Baumer_GCA12_CANopen_DS_EN.pdf
Baumer_GCA8-12_SW.ZIP
Baumer_GCA_BR_EN_1806_11203336_LRes.pdf
Baumer_GCA_CANopen_MA_BSIT_EN.pdf
                    
                
            
            Baumer_GCA12_CANopen_DS_EN.pdf
Baumer_GCA8-12_SW.ZIP
Baumer_GCA_BR_EN_1806_11203336_LRes.pdf
Baumer_GCA_CANopen_MA_BSIT_EN.pdf
                            Наш менеджер свяжется с вами в ближайшее время
                        
                     
                
 
                                         
                                         
                                         
                                         
                                         
                                         
                                         
                                         
                                         
                                         
                                         
                                         
                                 
                                 
                                 
                                 
                                 
                                
 
                   
                   
                  